Airbag control unit with part number 95910-K7200

What does the airbag control unit 95910-K7200 do?

The airbag control unit 95910-K7200 acts as the central unit for the restraint system (SRS) in vehicles of Hyundai. It evaluates the signals from the crash sensors and decides in an accident, within milliseconds, on triggering airbags and seatbelt pretensioners.

The unit checks the system continuously and indicates faults via the airbag warning light.

After an accident it stores crash data and locks itself. The lock is lifted only by the repair.

Why does the control unit 95910-K7200 fail?

Most often the failure on the 95910-K7200 is due to crash data stored after an accident, even if no airbag has deployed. Further causes are ageing components, cold solder joints, moisture and corrosion at plug connections, and voltage spikes.

A standard diagnostic tool cannot erase this data. Airbag24 erases the crash data during the repair.

Ageing components, cold solder joints, moisture and corrosion change the signals in the unit. Voltage spikes, for example from a weak battery or when jump-starting, additionally strain the electronics.

How can you tell that the 95910-K7200 is defective?

The airbag warning light in the instrument cluster lights up on the 95910-K7200 permanently or intermittently, and a fault message appears there. The diagnostic tool cannot establish a connection to the control unit, and the fault memory cannot be cleared.

A unit with this finding may possibly not be able to trigger airbags and seatbelt pretensioners in an emergency.

Whether the control unit itself is the cause is shown by reading out the fault memory.

Which vehicles is the 95910-K7200 fitted in?

The airbag control unit 95910-K7200 is fitted in these vehicles: Hyundai i10 BA (2019-2023) and BA Facelift (from 2023). Check whether your car is included by comparing the part number on the label of the removed unit.

The following list shows the vehicles known to us for this part number:

• Hyundai i10 BA (2019-2023)
• Hyundai i10 BA Facelift (from 2023)

The label comparison only ensures that you have the right unit. Have the fault memory read out beforehand. Only then does it show whether the control unit is defective or a plug or cable is the cause.

For the same vehicles, we also repair control units with the part numbers 95910-K7250.

How does the repair of the 95910-K7200 work?

First read out the fault memory and attach the log, then disconnect the battery and only then remove the control unit 95910-K7200. Afterwards create a repair order online and send in the unit.

The order of the first steps is prescribed for safety reasons. Please observe it before working on the control unit.

Airbag24 checks the unit on the test bench, repairs defective components and erases stored crash data before the function test follows. Checking, repairing and testing usually take 3–4 working days.

Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-K7200 get to Airbag24?

You send the control unit 95910-K7200 as a parcel or book a UPS collection for an extra charge. After the repair, Airbag24 sends the unit back to you by UPS.

Enclose the printed repair order and pack the unit shock-proof, so that it arrives safely.