Airbag control unit with part number 95910-K7250

What does the airbag control unit 95910-K7250 do?

The airbag control unit 95910-K7250 forms the control centre of the restraint system (SRS) in Hyundai vehicles. It evaluates the crash sensors, determines in an accident which airbags and seatbelt pretensioners are triggered, and checks the system for faults continuously.

The unit shows any faults it finds via the airbag warning light in the instrument cluster. The decision in an emergency is made in a fraction of a second.

After an accident the unit stores crash data and then locks itself.

Why does the control unit 95910-K7250 fail?

Most often the cause is crash data from an earlier accident, even if no airbag has deployed. This data cannot be erased with an ordinary diagnostic tool. Other causes are aged components, cold solder joints, moisture at plug connections and voltage spikes.

The following causes are also possible for a failure:

• aged electronic components
• cold solder joints
• moisture and corrosion at plug connections
• voltage spikes, for example from a weak battery or a jump start

Airbag24 removes the crash data during the repair.

How can you tell that the 95910-K7250 is defective?

An airbag warning light in the instrument cluster that lights up permanently or intermittently, an error message in the instrument cluster, a diagnostic tool without a connection to the control unit, or a fault memory that cannot be cleared all indicate a defect.

The airbag warning light in the instrument cluster shows the finding. In an emergency, the airbags and seatbelt pretensioners may fail to deploy as a result, so take the indication seriously.

Which vehicles is the 95910-K7250 fitted in?

The control unit 95910-K7250 is fitted in these vehicles: Hyundai i10 BA (2019-2023).

The list shows the vehicles known for this part number.

• Hyundai i10 BA (2019-2023)

Before removal, two checks make sense. Comparing the part number on the label of the removed unit with this page only confirms that it is the right unit. The fault memory should be read out beforehand, because only the log shows whether the control unit is defective or a plug or cable is the cause.

For the same vehicles, we also repair control units with the part numbers 95910-B9250, 95910-B9250 VER22.

How does the repair of the 95910-K7250 work?

First have the fault memory read out and enclose the log. Then disconnect the battery and only afterwards remove the control unit. Create a repair order online and send the well-packed unit in. Processing at Airbag24 usually takes 3–4 working days.

Airbag24 checks the unit on the test bench, repairs defective components, erases the crash data and carries out a functional test. Afterwards your own unit is sent back.

Our repairs come with 2 years' statutory liability for defects.

The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-K7250 get to Airbag24?

You send the unit as a parcel or book a UPS collection for an extra charge. After the repair Airbag24 returns it to you by UPS.

The printed repair order belongs in the parcel, and the unit should be packed shockproof.