Airbag control unit with part number 95910-K7500

What does the airbag control unit 95910-K7500 do?

The airbag control unit 95910-K7500 processes the signals from the crash sensors in Hyundai and decides in an emergency which airbags and seatbelt pretensioners fire. It monitors the restraint system continuously. After an accident, the unit stores crash data and locks itself.

The unit sits between the sensors and the firing circuits and makes its decision in a split second. If the monitoring detects a fault, the airbag warning light in the instrument cluster lights up.

Why does the control unit 95910-K7500 fail?

The most common cause is stored crash data after an accident, even if no airbag has deployed; an ordinary diagnostic tool cannot erase it. Aged components, cold solder joints, moisture and corrosion in plug connections, and voltage spikes are also among the causes.

The crash data stays in the unit until it is removed during the repair.

• aged components
• cold solder joints
• moisture and corrosion in plug connections
• voltage spikes from a weak battery or jump-starting

How can you tell that the 95910-K7500 is defective?

Signs of a defect are an airbag warning light in the instrument cluster that lights up permanently or intermittently, a fault message in the instrument cluster, no connection to the diagnostic tool, or a fault memory that cannot be cleared. In an emergency, airbags and seatbelt pretensioners may then fail to deploy.

• Airbag warning light, permanent or intermittent
• Fault message in the instrument cluster
• Diagnostic tool finds no connection to the control unit
• Fault memory cannot be cleared

Signs like these are a clear reason to have the system checked.

Which vehicles is the 95910-K7500 fitted in?

The airbag control unit 95910-K7500 is fitted in these vehicles: Hyundai i10 BA (2019-2023) and BA Facelift (from 2023). You can check whether your car is affected using the vehicle papers.

We have put together the vehicles for this part number in an overview:

• Hyundai i10 BA (2019-2023)
• Hyundai i10 BA Facelift (from 2023)

Comparing the part number on the label of the removed unit with this page only confirms that it is the correct unit. Only reading out the fault memory shows whether the control unit itself is defective or whether a plug or cable is the cause. Please have it read out before removal.

For the same vehicles, we also repair control units with the part numbers 95910-K7250.

How does the repair of the 95910-K7500 work?

You have the fault memory read out and attach the log. Then you disconnect the battery and only afterwards remove the control unit. Next, you create a repair order online and send the unit in well packed.

Airbag24 checks the unit on the test bench, replaces defective components, erases stored crash data and carries out a function test. Processing usually takes 3–4 working days, calculated for checking, repairing and testing alone.

The unit then goes back to you. Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-K7500 get to Airbag24?

The unit 95910-K7500 goes to Airbag24 as a parcel, or you book a UPS collection for an extra charge. It comes back to you by UPS after the repair.

Enclose the printed repair order with the parcel and pack the control unit shock-proof.