Airbag control unit with part number 95910-K9150

What does the airbag control unit 95910-K9150 do?

At Hyundai, the airbag control unit 95910-K9150 controls the restraint system. It continuously evaluates the signals from the crash sensors, decides in fractions of a second in an accident on airbags and seatbelt pretensioners, and reports faults via the airbag warning light.

After an accident, the unit stores crash data and locks itself.

Why does the control unit 95910-K9150 fail?

The most common cause is crash data stored after an accident, even without a deployed airbag; a normal diagnostic tool cannot delete it. Aged electronics, cold solder joints, moisture and corrosion, and voltage spikes are also possible causes.

The other causes can be summarised as follows:

• Aged electronic components
• Cold solder joints
• Moisture and corrosion at plug connectors
• Voltage spikes, for example from a weak battery or a jump start

The crash data remains in memory, even if nothing can be seen externally.

How can you tell that the 95910-K9150 is defective?

The airbag warning light in the instrument cluster lights up permanently or intermittently. In addition there is an error message, a diagnostic tool with no connection to the control unit, and a fault memory that cannot be cleared.

The light is the visible sign of a defect. In an emergency, the airbags and seatbelt pretensioners may then not deploy. Prompt inspection is therefore advisable.

Which vehicles is the 95910-K9150 fitted in?

The airbag control unit 95910-K9150 is fitted in these vehicles: Hyundai Veloster JS (2018-2022).

The database lists these vehicles for this part number:

• Hyundai Veloster JS (2018-2022)

Comparing the part number on the removed unit with this page confirms that it is the right unit. The fault memory shows the cause: whether the control unit is defective or a plug or cable is affected.

For the same vehicles, we also repair control units with the part numbers 95910-K9000.

How does the repair of the 95910-K9150 work?

At Airbag24, testing, repairing and function testing usually take 3–4 working days. You first read out the fault memory, then disconnect the battery and only then remove the control unit.

In the next step create the repair order online and enclose the log.

Airbag24 inspects the unit on the test bench, replaces defective components, deletes stored crash data and carries out a function test. Your own unit is then returned to you.

Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-K9150 get to Airbag24?

You send the unit to Airbag24 as a parcel, or you book a UPS collection for an extra charge. Airbag24 sends the repaired unit back by UPS.

Make sure the unit is packed shock-resistant and enclose the printed repair order.