Airbag control unit with part number 95910-M0000

What does the airbag control unit 95910-M0000 do?

The airbag control unit 95910-M0000 controls the restraint system (SRS) of Hyundai. It processes the measurements from the crash sensors, decides within milliseconds in a crash about airbags and seatbelt pretensioners, and monitors the system continuously. After an accident, it stores crash data and locks itself.

It makes faults visible via the airbag warning light in the instrument cluster.

Why does the control unit 95910-M0000 fail?

The most common cause for 95910-M0000 is crash data stored after an accident, even without a deployed airbag; a standard diagnostic tool cannot remove them. Further causes are aged electronics, cold solder joints, moisture and corrosion at plug connectors, and voltage spikes from a weak battery or jump starting.

Crash data in the memory are recognised when the fault memory is read out.

Moisture acts on the plug connectors over time, and voltage spikes can overload individual components.

How can you tell that the 95910-M0000 is defective?

The airbag warning light in the instrument cluster lights up permanently or intermittently, an error message appears in the instrument cluster, and the diagnostic tool cannot reach the control unit 95910-M0000. A fault memory that cannot be cleared confirms the finding. Airbags and seatbelt pretensioners may then fail to deploy in an emergency.

A damaged cable or a plug problem can produce the same pattern; the diagnosis decides what applies.

Which vehicles is the 95910-M0000 fitted in?

The control unit 95910-M0000 is fitted in these vehicles: Hyundai Creta GS (2014-2017) and GS Facelift (2017-2021).

The list below shows the vehicles to which this part number belongs.

• Hyundai Creta GS (2014-2017)
• Hyundai Creta GS Facelift (2017-2021)

Comparing with this page confirms that the unit matches the number; it can do no more. Equally important is the fault memory: have it read out before removal, because the log shows whether the control unit or a plug or cable is the cause.

For the same vehicles, we also repair control units with the part numbers 95910-A0000, 95910-A0700.

How does the repair of the 95910-M0000 work?

Your steps for 95910-M0000: have the fault memory read out and enclose the log, disconnect the battery, only then remove the control unit, then create the repair order online and send the unit in. Processing at Airbag24 usually takes 3–4 working days.

At Airbag24 the unit is examined on the test bench, defective components are repaired, the stored crash data are erased and a function test is carried out. Afterwards your own unit goes back to you.

Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-M0000 get to Airbag24?

The control unit 95910-M0000 reaches Airbag24 by parcel shipping or by a UPS collection booked for an extra charge. The return is handled by UPS.

Put the printed repair order into the parcel and pack the unit shockproof.