Airbag control unit with part number 95910-M4200

What does the airbag control unit 95910-M4200 do?

Within the SRS restraint system of Hyundai, the airbag control unit 95910-M4200 takes over central control. It evaluates the crash sensors, decides in an accident within milliseconds on airbags and seatbelt pretensioners, and monitors the system continuously.

If a fault is detected, the unit indicates it via the airbag warning light. After an accident, it stores crash data and locks itself. Monitoring never ends as long as the vehicle has power.

Why does the control unit 95910-M4200 fail?

The most common cause is crash data stored after an accident, even if no airbag was triggered, and a normal diagnostic tool cannot erase it. Other causes are aged components, cold solder joints, moisture and corrosion, and voltage spikes.

The further causes at a glance:

• Aged electronic components
• Cold solder joints
• Moisture and corrosion on plug connections
• Voltage spikes, for example from a weak battery or jump-starting

Airbag24 takes over erasing the crash data during the repair, because a normal diagnostic tool cannot do it.

How can you tell that the 95910-M4200 is defective?

If the airbag warning light in the instrument cluster lights up constantly or only intermittently, that is a clear sign of a defect. In addition, the instrument cluster shows an error message, the diagnostic tool finds no connection to the control unit, and the fault memory cannot be cleared.

In an emergency, airbags and seatbelt pretensioners may then fail to trigger, which is why such an indication is no trivial matter.

Which vehicles is the 95910-M4200 fitted in?

The 95910-M4200 was fitted in the following vehicles: Hyundai Creta GS (2014-2017) and GS Facelift (2017-2021).

The vehicles are listed individually here:

• Hyundai Creta GS (2014-2017)
• Hyundai Creta GS Facelift (2017-2021)

You can compare the label with this page at any time; it only shows that the number is correct. The fault memory is decisive for the cause. Have it read out beforehand, because it shows whether the control unit itself is defective or whether a plug or a cable causes the fault.

For the same vehicles, we also repair control units with the part numbers 95910-A0000, 95910-A0700.

How does the repair of the 95910-M4200 work?

First have the fault memory read out and enclose the log. Then disconnect the battery and only after that remove the control unit. Processing at Airbag24 usually takes 3–4 working days.

Afterwards, create a repair order online and send the unit in well packed. At Airbag24, it is examined on the test bench, defective components are repaired, stored crash data is erased and a function test is carried out. Your own unit is then returned to you.

Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-M4200 get to Airbag24?

You send the control unit as a parcel to Airbag24 or book a UPS collection for an extra charge. After the repair, Airbag24 returns it by UPS.

The printed repair order goes into the parcel. Pack the unit shock-proof.