Airbag control unit with part number 95910-M6300

What does the airbag control unit 95910-M6300 do?

At Kia, the airbag control unit 95910-M6300 is the control unit of the restraint system (SRS). It evaluates the crash sensors and decides in an accident, within milliseconds, which airbags and seatbelt pretensioners to trigger. If it detects a fault, this is shown via the airbag warning light.

Outside an accident, the unit continuously monitors sensors, igniters and cables. It stores any irregularities in the fault memory.

After an accident, it creates crash data and locks itself.

Why does the control unit 95910-M6300 fail?

The most common cause is crash data stored after an accident, even if no airbag has deployed. Other causes are aged electronic components, cold solder joints, moisture and corrosion at plug connectors, and voltage spikes from a weak battery or jump-starting.

A normal diagnostic tool cannot erase the crash data. Airbag24 takes care of that during the repair, together with checking the other components.

Aged components and moisture affect the electronics gradually. Voltage spikes, by contrast, occur suddenly.

How can you tell that the 95910-M6300 is defective?

The airbag warning light in the instrument cluster stays on permanently or intermittently. In addition, an error message may appear, the diagnostic tool finds no connection to the control unit, and the fault memory cannot be erased. In an emergency, airbags and seatbelt pretensioners may then fail to deploy.

The warning light shows the finding immediately. Therefore, have the system checked promptly as soon as it lights up.

A diagnostic tool without a connection is also a sign that something is wrong in the system.

Which vehicles is the 95910-M6300 fitted in?

The control unit 95910-M6300 is fitted at Kia in these vehicles: Kia Forte BD (from 2018).

The list of models:

• Kia Forte BD (from 2018)

Two checks come before removal. Compare the part number on the label with this page, and you will know that it is the right unit. Also have the fault memory read out, because only the result shows whether the control unit is defective or a connector or cable is the cause.

For the same vehicles, we also repair control units with the part numbers 95910-B0100, 95910A7300, 95910A7350, 95910B0000, 95910H9430.

How does the repair of the 95910-M6300 work?

First, you read out the fault memory and enclose the log. Then you disconnect the battery, remove the control unit, create a repair order online and send the unit in well packed.

Airbag24 checks the unit on the test bench, replaces defective components, erases the crash data and carries out a function test. Your own unit is returned afterwards.

Processing at Airbag24 usually takes 3–4 working days. Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-M6300 get to Airbag24?

Either you send the control unit in as a parcel, or you book a UPS collection for an extra charge. After the repair, Airbag24 sends it back by UPS.

The printed repair order goes into the parcel. Pack the unit shockproof.