Airbag control unit with part number 95910-M6350

What does the airbag control unit 95910-M6350 do?

The 95910-M6350 is the restraint system (SRS) control unit in Kia vehicles. It evaluates the crash sensors, assesses the signals within milliseconds and thereby controls airbags and seatbelt pretensioners. It indicates faults via the airbag warning light.

During operation, the unit continuously checks the connections and the connected components.

After a crash, it stores crash data and locks itself.

Why does the control unit 95910-M6350 fail?

The most common cause in the 95910-M6350 is crash data that remains in the memory after the accident, even if no airbag was triggered. A normal diagnostic tool does not erase it. Other causes are aged components, solder joints, moisture and voltage spikes.

Crash data arises from the accident and remains in the unit until someone removes it deliberately. An ordinary diagnostic tool cannot do this.

Aged electronic components, cold solder joints and moisture at plug connections form the remaining causes. Plug connections are particularly sensitive to corrosion.

Voltage spikes, for example from a weak battery or a jump start, place additional strain on the electronics.

How can you tell that the 95910-M6350 is defective?

A defect in the 95910-M6350 becomes visible through the airbag warning light in the instrument cluster, which lights up constantly or intermittently. A fault message in the instrument cluster is added. In an emergency, airbags and seatbelt pretensioners may possibly fail to deploy.

In this case the diagnostic tool finds no connection to the control unit, and the fault memory cannot be erased. Both point to a problem in the system.

For this reason, the warning light deserves prompt attention.

Which vehicles is the 95910-M6350 fitted in?

The information applies to Kia vehicles with this unit. The control unit 95910-M6350 is fitted in these vehicles: Kia Forte BD (from 2018).

Here is the overview:

• Kia Forte BD (from 2018)

On the one hand, comparing the part number on the label of the removed unit with this page confirms that it is the right unit. On the other hand, only the fault memory read out beforehand shows whether the control unit is defective or whether a plug or cable is the cause.

For the same vehicles, we also repair control units with the part numbers 95910-B0100, 95910A7300, 95910A7350, 95910B0000, 95910H9430.

How does the repair of the 95910-M6350 work?

In the repair of the 95910-M6350, you first have the fault memory read out and enclose the log. Then disconnect the battery and only afterwards remove the control unit. Processing at Airbag24 generally takes 3–4 working days.

You create the repair order online before the well-packed unit is sent to Airbag24. There it goes onto the test bench. Defective components are replaced, the crash data erased and finally a function test carried out. Your own unit is sent back afterwards.

Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-M6350 get to Airbag24?

The control unit 95910-M6350 can be sent in as a parcel or collected by UPS for an extra charge. Airbag24 sends the repaired unit back by UPS.

Pack the unit shockproof and enclose the printed repair order.