Airbag control unit with part number 95910-M6400

What does the airbag control unit 95910-M6400 do?

The airbag control unit 95910-M6400 handles the control of the restraint system for Kia. Based on the crash sensors, it selects the airbags and seatbelt pretensioners to be triggered in an accident and monitors the system continuously.

The unit indicates a fault with the airbag warning light in the instrument cluster. After an accident, it stores crash data and locks itself.

Why does the control unit 95910-M6400 fail?

The most common cause in the 95910-M6400 is crash data stored after an accident, even without an airbag having triggered. Further causes are:

• ageing of electronic components
• dry solder joints
• moisture and corrosion at plug connections
• voltage spikes, for example from jump-starting or a weak battery

A standard diagnostic tool does not erase crash data. Airbag24 removes it during the repair, and the other causes are investigated on the test bench.

How can you tell that the 95910-M6400 is defective?

The airbag warning light in the instrument cluster lights up continuously or intermittently, and an error message may also appear. If the diagnostic tool cannot establish a connection, or the fault memory cannot be emptied, this points to a defect in the 95910-M6400.

In an emergency, airbags and seatbelt pretensioners may therefore not trigger. The warning light is a clear prompt to act promptly.

Which vehicles is the 95910-M6400 fitted in?

The control unit 95910-M6400 is fitted in these vehicles: Kia Forte BD (from 2018).

For this part number, we list these vehicles:

• Kia Forte BD (from 2018)

First compare the part number on the label of the removed unit with this page. This only confirms that it is the right unit. Only the fault memory read out beforehand reveals whether the control unit is defective or whether a plug or a cable is the cause.

For the same vehicles, we also repair control units with the part numbers 95910-B0100, 95910A7300, 95910A7350, 95910B0000, 95910H9430.

How does the repair of the 95910-M6400 work?

First have the fault memory read out and enclose the log. Then disconnect the battery, only afterwards remove the control unit, and create a repair order online. Next, send in the well-packed unit.

At Airbag24, the unit is examined on the test bench, defective components are replaced, crash data is erased and a function test is carried out. Processing there usually takes 3–4 working days, after which your own unit is returned.

Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-M6400 get to Airbag24?

The route to Airbag24 is either by parcel or by a UPS collection booked for an extra charge. The control unit 95910-M6400 also comes back via UPS after the repair.

A shock-proof box and the printed repair order form the basis for this.