Airbag control unit with part number 95910-M6750

What does the airbag control unit 95910-M6750 do?

The airbag control unit 95910-M6750 coordinates the restraint system (SRS) for Kia. It processes the data from the crash sensors, decides in a crash within milliseconds which airbags and seatbelt pretensioners fire, and monitors the system continuously.

If the unit detects a fault, it shows it via the airbag warning light in the instrument cluster. To do so, it checks the activation of the firing elements.

In a crash it records crash data and locks itself.

Why does the control unit 95910-M6750 fail?

Crash data stored after an accident is most often the cause, even if no airbag has deployed. A normal diagnostic tool cannot erase it. Ageing electronic components, cold solder joints, moisture and corrosion at plug connections, as well as voltage spikes, also come into consideration.

Airbag24 erases the crash data during the repair. This point is therefore firmly anchored in the process.

The other causes relate to age, environmental influences or the power supply. A weak battery or jump-starting can cause voltage spikes, while moisture in plugs causes corrosion over the long term.

How can you tell that the 95910-M6750 is defective?

The airbag warning light in the instrument cluster lights up permanently or intermittently, an error message appears in the instrument cluster, the diagnostic tool finds no connection to the control unit, and the fault memory cannot be cleared.

In that case, airbags and seatbelt pretensioners may fail to deploy in an emergency. A check should be planned soon.

The warning comes directly from the control unit.

Which vehicles is the 95910-M6750 fitted in?

The 95910-M6750 is fitted in these vehicles: Kia Forte BD (from 2018).

The vehicle list follows:

• Kia Forte BD (from 2018)

Matching the part number with the label on the removed unit confirms that you have the correct unit. Whether the control unit itself is defective is shown only by the fault memory read out beforehand. It also shows whether a plug or a cable is the cause.

For the same vehicles, we also repair control units with the part numbers 95910-B0100, 95910A7300, 95910A7350, 95910B0000, 95910H9430.

How does the repair of the 95910-M6750 work?

First read out the fault memory and enclose the log. Then disconnect the battery before removing the control unit. Next, create the repair order online and send the unit in packed.

Airbag24 checks it on the test bench, repairs defective components, erases the crash data and carries out a function test. Processing usually takes 3–4 working days. Afterwards your unit goes back to you.

Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-M6750 get to Airbag24?

Either you send the control unit as a parcel, or you book a UPS collection for an extra charge. Airbag24 sends the repaired unit back to you by UPS.

The printed repair order belongs in the parcel, and you also pack the unit shock-proof.