Airbag control unit with part number 95910-M7600

What does the airbag control unit 95910-M7600 do?

The airbag control unit 95910-M7600 is the central control unit of the restraint system (SRS) for Kia. It processes the data from the crash sensors and, in an accident, decides within milliseconds on triggering the airbags and seatbelt pretensioners.

It monitors the components of the system continuously. If it shows a fault, the airbag warning light in the instrument cluster lights up for this.

After an accident the unit stores the crash data and locks itself. Only a repair lifts this lock.

Why does the control unit 95910-M7600 fail?

Stored crash data is the most common cause on the 95910-M7600, even if no airbag has triggered. A normal diagnostic tool does not erase it.

Airbag24 erases the crash data during the repair. You do not need to prepare anything for this.

Further causes are aged electronic parts, cold solder joints, moisture and corrosion at plug connections, and voltage spikes, for example from a weak battery or a jump start. Several of these points can occur together.

How can you tell that the 95910-M7600 is defective?

A defect on the 95910-M7600 can be recognised by signs in the instrument cluster. Typical are an airbag warning light that lights up permanently or intermittently, and an error message in the instrument cluster.

The following signs also appear:

• no connection between diagnostic tool and control unit
• fault memory that cannot be cleared

In an emergency, airbags and seatbelt pretensioners may then not trigger. Please have the fault clarified promptly.

Which vehicles is the 95910-M7600 fitted in?

The 95910-M7600 is fitted in these vehicles: Kia Forte BD (from 2018). The part number on the unit is always decisive for the assignment.

Here you find the vehicle list for this part number:

• Kia Forte BD (from 2018)

A comparison of the part number on the label with this page only ensures that you have the right unit. Have the fault memory read out beforehand, because only its log shows whether the control unit is defective or whether a connector or cable is the cause.

For the same vehicles, we also repair control units with the part numbers 95910-B0100, 95910A7300, 95910A7350, 95910B0000, 95910H9430.

How does the repair of the 95910-M7600 work?

Reading out the fault memory comes first, and the log belongs with it. Then disconnect the battery and only then remove the control unit 95910-M7600. Processing at Airbag24 usually takes 3–4 working days.

Then create the repair order online, pack the unit and send it in.

At Airbag24 the unit goes onto the test bench. Defective components are renewed, the crash data is erased and a functional test is carried out. Afterwards your own unit goes back. Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-M7600 get to Airbag24?

The 95910-M7600 arrives at Airbag24 either as a parcel or via a UPS collection booked for an extra charge. The return after the repair is made by UPS.

Place the printed repair order in the parcel and pack the unit shockproof.