Airbag control unit with part number 95910-NI000

What does the airbag control unit 95910-NI000 do?

The 95910-NI000 coordinates the restraint system (SRS) of Hyundai in the vehicle. It reads the crash sensors, decides within milliseconds on airbags and seatbelt pretensioners, and at the same time monitors the entire system. Faults are passed on via the airbag warning light in the instrument cluster.

Triggering the ignition circuits is part of this, as is the continuous self-check. Without these functions it would remain open whether the system would be ready in an emergency.

After an accident the unit stores crash data and locks itself.

Why does the control unit 95910-NI000 fail?

Stored crash data is the most common cause in the 95910-NI000, even when no airbag deployed in the accident. A normal diagnostic tool cannot erase it. Added to this are aged components, cold solder joints, moisture and corrosion on plug connectors, and voltage spikes.

The measured values are recorded at the moment of impact and remain in the memory, even if the vehicle afterwards seems to run without problems.

The other causes develop gradually. Components age, connections take up moisture, and voltage spikes arise, for example with a weak battery or jump-starting.

How can you tell that the 95910-NI000 is defective?

A defect in the 95910-NI000 first shows on the airbag warning light, when it lights up permanently or intermittently. A fault message in the instrument cluster, a missing connection between the diagnostic tool and the control unit, or a fault memory that cannot be cleared likewise indicate a fault. In an emergency, airbags and seatbelt pretensioners may then fail to trigger.

In everyday life the warning light is the first signal you notice. It shows a fault but does not name the affected component.

Write down an error message before you reset anything.

Which vehicles is the 95910-NI000 fitted in?

We have the 95910-NI000 recorded for Hyundai vehicles. It is fitted in these vehicles: Hyundai Ioniq 5 NE (2021-2024) and NE Facelift (from 2024).

Here is the list of recorded vehicles:

• Hyundai Ioniq 5 NE (2021-2024)
• Hyundai Ioniq 5 NE Facelift (from 2024)

Before sending, compare the part number on the label of the removed unit with this page. This only confirms that you have the right unit. Also have the fault memory read out before you hand in the unit, because this log shows whether the control unit is defective or whether a plug or cable is causing the fault.

For the same vehicles, we also repair control units with the part numbers 95910-GI110, 95910-PI600, 95910-PI610.

How does the repair of the 95910-NI000 work?

First have the fault memory read out and enclose the log, then disconnect the battery and only then remove the 95910-NI000. Then create a repair order online and send the unit in well packed. Airbag24 needs 3–4 working days for testing, repairing and checking.

The sequence is prescribed for safety reasons. Airbag24 checks the control unit on the test bench, replaces defective components, deletes stored crash data and carries out a function test.

Then you receive your own, repaired unit back. Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-NI000 get to Airbag24?

You send the 95910-NI000 as a parcel, or for an extra charge you book a UPS collection. Airbag24 sends it back to you by UPS after repair.

Enclose the printed repair order in the parcel and pack the unit shock-proof.