Airbag control unit with part number 95910-NI100

What does the airbag control unit 95910-NI100 do?

In the vehicle of Hyundai, the airbag control unit 95910-NI100 takes over control of the SRS restraint system. It processes the measured values of the crash sensors, selects the appropriate airbags and seatbelt pretensioners in an accident, and triggers them.

During operation it monitors the entire system and keeps it under control. If it detects a fault, it indicates this via the airbag warning light in the instrument cluster.

After an accident, the unit secures the crash data and is locked afterwards.

Why does the control unit 95910-NI100 fail?

The most common cause is crash data remaining in the unit after an accident, even if no airbag has triggered. Other causes are aged components, cold solder joints, moisture and corrosion at plug connections, and voltage spikes.

A normal diagnostic tool cannot erase this crash data. Airbag24 erases it during the repair, so you do not need to take care of it yourself.

The other causes can only be named in general terms. Electronics age over time, solder joints can turn cold, and moisture with salt attacks contacts. Voltage spikes arise, for example, with a weak battery or through jump-starting.

How can you tell that the 95910-NI100 is defective?

A defect shows up as the airbag warning light in the instrument cluster lighting up permanently or intermittently, and as a fault message there. In addition, the diagnostic tool finds no connection to the control unit, and the fault memory cannot be cleared.

This means that airbags and seatbelt pretensioners may not trigger in an emergency.

Which vehicles is the 95910-NI100 fitted in?

This part number is assigned vehicles. The control unit 95910-NI100 is fitted in these vehicles: Hyundai Ioniq 5 NE (2021-2024) and NE Facelift (from 2024).

The vehicles are listed below:

• Hyundai Ioniq 5 NE (2021-2024)
• Hyundai Ioniq 5 NE Facelift (from 2024)

Match the part number on the label with this page; this way you make sure that you have the correct unit. Have the fault memory read out in advance. Only this result shows whether the control unit itself is defective or whether a plug or cable is the cause.

For the same vehicles, we also repair control units with the part numbers 95910-GI110, 95910-PI600, 95910-PI610.

How does the repair of the 95910-NI100 work?

Before you remove the unit, have the fault memory read out and attach the log. Then disconnect the battery and only then remove the control unit. Create the repair order online and pack the unit well. Processing at Airbag24 usually takes 3–4 working days.

Airbag24 checks the unit on the test bench, repairs defective components, erases stored crash data and carries out a function test. Afterwards you receive your own unit back.

Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-NI100 get to Airbag24?

By parcel the unit goes to us, or for an extra charge UPS collects it from you. After the repair, UPS brings it back to you.

Enclose the printed repair order in the parcel. Also make sure the control unit is packed shock-resistant.