Airbag control unit with part number 95910-NI200

What does the airbag control unit 95910-NI200 do?

The airbag control unit 95910-NI200 coordinates the restraint system (SRS) of Hyundai. It receives the signals from the crash sensors, calculates the triggering of the airbags and seatbelt pretensioners in an accident, and monitors the entire system. If it detects a fault, it indicates this via the airbag warning light.

After an accident the control unit stores crash data and locks itself. Only the repair lifts this lock.

The unit works in the background as soon as the vehicle is powered. So that the restraint system can respond in an emergency, the electronics must work flawlessly at all times.

Why does the control unit 95910-NI200 fail?

At the 95910-NI200 the most common cause is crash data from an earlier accident, even if no airbag has deployed; a normal diagnostic tool cannot erase it. In addition, ageing electronic components, cold solder joints, moisture and corrosion at plug connections and voltage spikes come into consideration, for example through a jump start or a weak battery.

The control unit creates crash data regardless of whether an airbag has deployed. This entry can therefore also be present in a vehicle where no triggering took place.

The other causes mainly concern the electronics. With age, components lose reliability, cold solder joints can lose contact, and moisture with corrosion disturbs the plug connections. Voltage spikes also strain the electronics.

How can you tell that the 95910-NI200 is defective?

A defect on the 95910-NI200 shows itself when the airbag warning light in the instrument cluster lights permanently or at times, when a fault message appears, when the diagnostic tool cannot connect to the control unit, or when a fault memory cannot be cleared. In an emergency, airbags and seatbelt pretensioners may then not trigger.

The warning light is the most important warning signal in the vehicle. It does not light up for no reason, and if you ignore it, you miss the indication that something is wrong in an emergency.

A fault can also lie in a plug connection or a cable. The warning light helps narrow things down, but a diagnosis remains necessary.

Which vehicles is the 95910-NI200 fitted in?

For the assignment, the part number on the label of the unit counts. The control unit 95910-NI200 is fitted in these vehicles: Hyundai Ioniq 5 NE (2021-2024) and NE Facelift (from 2024).

In detail, these are the following models:

• Hyundai Ioniq 5 NE (2021-2024)
• Hyundai Ioniq 5 NE Facelift (from 2024)

Both steps help you. Compare the part number on the label of the removed unit with this page; this only ensures that it is the correct unit. Also have the fault memory read out before you remove anything, because only this result shows whether the control unit is defective or whether a plug or cable is the cause.

For the same vehicles, we also repair control units with the part numbers 95910-GI110, 95910-PI600, 95910-PI610.

How does the repair of the 95910-NI200 work?

First have the fault memory read out and attach the log to the unit. Then disconnect the battery and remove the control unit; next create a repair order online and pack the unit well. Processing at Airbag24 usually takes 3–4 working days.

Airbag24 checks the unit received on the test bench and replaces defective components. Stored crash data is erased, then a function test follows. After that your own unit goes back to you.

Our repairs come with 2 years' statutory liability for defects.

The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-NI200 get to Airbag24?

You can send the control unit 95910-NI200 as a parcel or book a UPS collection for an extra charge. Airbag24 sends it back to you by UPS after repair.

Enclose the printed repair order with the parcel. Pack the unit shock-proof, so that it survives transport undamaged.