Airbag control unit with part number 95910-P2000

What does the airbag control unit 95910-P2000 do?

The airbag control unit 95910-P2000 is the central control unit of the restraint system (SRS) for Kia. It evaluates the signals from the crash sensors, decides within milliseconds in an accident which airbags and seatbelt pretensioners are triggered, and reports faults via the airbag warning light.

The control unit monitors the entire system continuously, so a fault is detected early. After an accident, the unit stores crash data and locks itself. Only the repair lifts this lock.

Why does the control unit 95910-P2000 fail?

The most common cause is crash data stored after an accident, even if no airbag was triggered. An ordinary diagnostic tool cannot erase it. Other causes include ageing electronic components, cold solder joints, moisture and corrosion on plug connections, and voltage spikes, for example from a weak battery or a jump start.

Which of these causes applies to a particular vehicle only becomes clear from reading out the fault memory. Without this step, it cannot be said whether the unit itself is affected.

How can you tell that the 95910-P2000 is defective?

A defect shows up at the airbag warning light in the instrument cluster, which lights up permanently or intermittently, and at a fault message in the instrument cluster. In addition come a missing connection to the diagnostic tool and a fault memory that cannot be cleared.

The signs can occur individually or together:

• The airbag warning light is on permanently or intermittently.
• A fault message appears in the instrument cluster.
• The diagnostic tool cannot communicate with the control unit.
• The fault memory cannot be cleared.

In an emergency, airbags and seatbelt pretensioners may not trigger in the event of a defect. Take a lit warning light seriously and have the system checked promptly.

Which vehicles is the 95910-P2000 fitted in?

To check whether your vehicle is affected, use the part number. The airbag control unit 95910-P2000 is fitted in these vehicles: Kia Sorento MQ4 (from 2020).

For orientation, here is the list of vehicles associated with this part number.

• Kia Sorento MQ4 (from 2020)

Compare the part number on the label of the removed unit with this page, so that you know you have the right unit. Also have the fault memory read out before the control unit is removed, because only the result shows whether the control unit is defective or whether a plug or cable is the cause.

For the same vehicles, we also repair control units with the part numbers 95910-P2100, 95910-P4250.

How does the repair of the 95910-P2000 work?

First have the fault memory read out and attach the log to the unit. Then disconnect the battery and only then remove the control unit. Then create a repair order online and send the unit in well packed.

At Airbag24, the unit is examined on the test bench, defective components are replaced, the crash data is erased and a function test is carried out. Processing usually takes 3–4 working days, after which your own unit is returned to you.

Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-P2000 get to Airbag24?

You send the unit as a parcel or book a UPS collection for an extra charge. After the repair, Airbag24 sends it back by UPS.

Put the printed repair order into the parcel and pack the unit shockproof.