Airbag control unit with part number 95910-P2150

What does the airbag control unit 95910-P2150 do?

The airbag control unit 95910-P2150 controls the triggering in the restraint system (SRS) of Kia. It receives the messages from the crash sensors, calculates in an accident within fractions of a second which airbags and seatbelt pretensioners fire, and monitors the system constantly. After an accident, it stores crash data and locks itself.

If the unit detects a fault, the airbag warning light in the instrument cluster lights up. In addition, the fault is recorded in the fault memory.

Why does the control unit 95910-P2150 fail?

The most common cause is crash data that remains in the 95910-P2150 after an accident, even if no airbag was triggered. Added to this are aged components, cold solder joints, moisture and corrosion at plug connections, and voltage spikes, for example from a weak battery or jump-starting. A normal diagnostic tool cannot remove the crash data.

The data stays in memory because of the event itself. The diagnostic tool reads the fault memory but does not remove the crash data.

The other causes act over time. Ageing of the electronics, moisture and salt in plug connections, and loose solder joints gradually degrade the function until it becomes noticeable.

How can you tell that the 95910-P2150 is defective?

Typical signs at the 95910-P2150 are an airbag warning light that lights up constantly or intermittently, an error message in the instrument cluster, a diagnostic tool without connection to the control unit, and a fault memory that cannot be erased. Airbags and seatbelt pretensioners may then fail to trigger in an emergency.

• The airbag warning light is on constantly or intermittently
• An error message appears in the instrument cluster
• The diagnostic tool does not establish a connection
• The fault memory cannot be erased

Take the warning light seriously, because it is the signal the system uses to indicate a fault.

Which vehicles is the 95910-P2150 fitted in?

The control unit 95910-P2150 is fitted in the following vehicles: Kia Sorento MQ4 (from 2020).

Here follows the vehicle list for this part number:

• Kia Sorento MQ4 (from 2020)

First compare the number on the label of the removed unit with this page; this ensures that you have the correct unit. Have the fault memory read out beforehand, because only this log shows whether the control unit is defective or whether a plug or cable is the cause.

For the same vehicles, we also repair control units with the part numbers 95910-P2100, 95910-P4250.

How does the repair of the 95910-P2150 work?

First have the fault memory on the 95910-P2150 read out and attach the log to the unit. Then disconnect the battery before you remove the control unit. Only then create a repair order online and send in the well-packed unit.

At Airbag24, the unit is examined on the test bench, defective components are repaired, stored crash data is erased and a function test is carried out. Afterwards your own unit is returned to you.

Processing usually takes 3–4 working days. Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-P2150 get to Airbag24?

You send the control unit 95910-P2150 as a parcel, or you arrange a UPS collection for an extra charge. After the repair, UPS returns the unit to you.

The printed repair order goes into the parcel, and you pack the unit shock-proof.