Airbag control unit with part number 95910-P2320

What does the airbag control unit 95910-P2320 do?

The airbag control unit 95910-P2320 is the control unit of the restraint system (SRS) for Kia. It processes the signals from the impact sensors, decides in an accident within milliseconds on airbags and seatbelt pretensioners, and monitors the system. It indicates faults via the airbag warning light.

Monitoring covers all components whose failure would prevent triggering. Faults found are stored in the fault memory.

After an accident the unit stores crash data and locks itself.

Why does the control unit 95910-P2320 fail?

The most common cause at the 95910-P2320 is crash data stored after an accident, even if no airbag has deployed. A normal diagnostic tool cannot erase it. Besides this, ageing electronics, cold solder joints, moisture and corrosion at plug connections, and voltage spikes come into consideration.

Ageing electronics lose reliability over the years, and cold solder joints can interrupt the contact.

Moisture and corrosion attack the plug connections. Voltage spikes, for example from a weak battery or a jump start, put additional strain on the electronics.

How can you tell that the 95910-P2320 is defective?

A defect shows itself through these signs:

• The airbag warning light in the instrument cluster lights permanently or at times.
• A fault message appears in the instrument cluster.
• The diagnostic tool does not get a connection to the control unit.
• The fault memory cannot be cleared.

These signs make it clearly recognisable that the restraint system is reporting a fault. In an emergency, airbags and seatbelt pretensioners may then not trigger.

Which vehicles is the 95910-P2320 fitted in?

The control unit 95910-P2320 is fitted in these vehicles: Kia Sorento MQ4 (from 2020).

The list shows the vehicles recorded for this part number.

• Kia Sorento MQ4 (from 2020)

Compare the part number on the label of the removed unit with this page, to make sure it is the correct unit. Have the fault memory read out beforehand. Only this result shows whether the control unit is defective or whether a plug or cable is the cause.

For the same vehicles, we also repair control units with the part numbers 95910-P2100, 95910-P4250.

How does the repair of the 95910-P2320 work?

First have the fault memory read out and attach the log. Then disconnect the battery and only then remove the control unit. Next you create a repair order online and send the unit in well packed.

Airbag24 checks the unit on the test bench, replaces defective components and erases the stored crash data. A function test then follows, and processing at Airbag24 usually takes 3–4 working days.

Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-P2320 get to Airbag24?

You send the control unit 95910-P2320 as a parcel or arrange a UPS collection for an extra charge. After repair Airbag24 sends it back to you by UPS.

Pack the unit shock-proof and put the printed repair order into the parcel.