Airbag control unit with part number 95910-P2350

What does the airbag control unit 95910-P2350 do?

The airbag control unit 95910-P2350 forms the central control module of the restraint system (SRS) in the Kia. It checks the crash sensors, determines in fractions of a second which airbags and seatbelt pretensioners to trigger in an accident, and reports faults via the airbag warning light.

As long as the system is in order, monitoring runs unobtrusively in the background. Only a fault or an accident makes the unit's task visible.

After an accident it stores crash data and locks itself. Repair is the only way to lift this lock.

Why does the control unit 95910-P2350 fail?

Most often the cause is crash data from an earlier accident, even if no airbag deployed. A normal diagnostic tool cannot remove it. Other causes include aged components, cold solder joints, moisture and corrosion, and voltage spikes.

Crash data is the most important cause because it stays in the memory until it is deleted during repair. Airbag24 carries out this step, so the unit works without the entry afterwards.

The other causes affect the electronics and the connections. Solder joints can go cold, components age, and moisture and corrosion impair plug connections. Voltage spikes from a weak battery or a jump start can overload circuits.

How can you tell that the 95910-P2350 is defective?

A defect shows itself through the airbag warning light in the instrument cluster, which stays on permanently or intermittently. Added to this are a fault message in the instrument cluster, no connection from the diagnostic tool, and a fault memory that cannot be cleared.

The airbag warning light in the instrument cluster is the clearest sign. It stays on as long as the fault persists, and it may also appear only intermittently.

In an emergency, airbags and seatbelt pretensioners may fail to trigger. A check is therefore advisable without delay.

Which vehicles is the 95910-P2350 fitted in?

The 95910-P2350 is fitted in these vehicles: Kia Sorento MQ4 (from 2020).

The list of vehicles stored for this part number:

• Kia Sorento MQ4 (from 2020)

Before removal, compare the part number on the label of the unit with this page. This only shows that it is the right unit. Have the fault memory read out in addition, because only this result shows whether the control unit is defective or whether a plug or cable is the cause.

For the same vehicles, we also repair control units with the part numbers 95910-P2100, 95910-P4250.

How does the repair of the 95910-P2350 work?

First have the fault memory read out and attach the log, then disconnect the battery and remove the control unit. Then create a repair order online and send the unit in packaging. Processing at Airbag24 usually takes 3–4 working days.

Airbag24 checks the unit on the test bench, replaces defective components and deletes stored crash data. A function test follows.

Afterwards your own unit is sent back to you. Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-P2350 get to Airbag24?

You send the unit as a parcel or book a UPS collection for an extra charge. After the repair, Airbag24 returns it by UPS.

Put the printed repair order into the parcel and pack the unit shock-proof.