Airbag control unit with part number 95910-P2600

What does the airbag control unit 95910-P2600 do?

The airbag control unit 95910-P2600 controls the restraint system (SRS) for Kia as its central unit. It processes the crash sensors, decides in an emergency within milliseconds on airbags and seatbelt pretensioners, and monitors the system continuously.

It indicates faults via the airbag warning light. After an accident it stores crash data and locks itself.

Monitoring runs without interruption for as long as the vehicle receives power.

Why does the control unit 95910-P2600 fail?

The most common cause of the 95910-P2600 is crash data stored after an accident, even if no airbag has deployed. Ageing electronic components, cold solder joints, moisture and corrosion at plug connections, and voltage spikes are also possible causes.

Crash data remains in memory as the trace of a load. A normal diagnostic tool cannot erase it, so the fault cannot be resolved by simply reading it out.

Voltage spikes arise, for example, from a weak battery or from a jump start and strain the electronics. The other causes only become apparent when the unit is examined.

How can you tell that the 95910-P2600 is defective?

On the 95910-P2600, a defect is recognised by the airbag warning light in the instrument cluster, which lights up permanently or intermittently. Further signs appear in the instrument cluster and on the diagnostic tool.

• Error message in the instrument cluster
• No connection between the diagnostic tool and the control unit
• Fault memory cannot be cleared

In an emergency, airbags and seatbelt pretensioners may then not deploy. Therefore have such a sign examined promptly.

Which vehicles is the 95910-P2600 fitted in?

The control unit 95910-P2600 is fitted in these vehicles: Kia Sorento MQ4 (from 2020).

The vehicles linked to this part number in our data are listed below:

• Kia Sorento MQ4 (from 2020)

Comparing the part number on the label of the removed unit with this page only confirms that you have the right unit. Whether the control unit is faulty or a plug or cable is the cause is shown only by a fault memory that was read out beforehand.

For the same vehicles, we also repair control units with the part numbers 95910-P2100, 95910-P4250.

How does the repair of the 95910-P2600 work?

First have the fault memory read out and attach the log, then disconnect the battery and only then remove the 95910-P2600; afterwards create a repair order online and pack the unit well. Airbag24 checks it on the test bench, repairs defective components, erases stored crash data and carries out a function test before your own unit is returned. Processing at Airbag24 usually takes 3–4 working days.

The log helps the inspection, because it documents the stored faults.

Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-P2600 get to Airbag24?

You choose the route yourself: you send the control unit 95910-P2600 as a parcel or book a UPS collection for an extra charge. After the repair, the unit comes back to you by UPS.

The printed repair order belongs in the parcel. Pack the unit shock-proof.