Airbag control unit with part number 95910-P2700

What does the airbag control unit 95910-P2700 do?

As the central control of the restraint system (SRS) of Kia, the airbag control unit 95910-P2700 governs the deployment of airbags and seatbelt pretensioners. The signals from the crash sensors converge there, are evaluated within milliseconds and are monitored. After an accident, the unit stores crash data and locks itself.

The entire system is monitored, that is, sensors, wiring and firing units. The airbag warning light in the instrument cluster indicates every fault detected.

The stored crash data remain in the unit, regardless of whether an airbag has deployed.

Why does the control unit 95910-P2700 fail?

Most common cause: crash data stored after an accident, even without a deployed airbag. A normal diagnostic tool does not erase it; Airbag24 removes it during the repair. Other causes are aged electronic components, cold solder joints, moisture and corrosion at plug connectors, and voltage spikes.

Crash data cannot be eliminated by reading out. It stays in the memory until the repair removes it.

Aged components and cold solder joints worsen the connections over time. The unit thus becomes gradually unreliable.

Moisture and corrosion in plug connectors create transition resistances. Voltage spikes from a weak battery or a jump start put additional strain on the electronics.

How can you tell that the 95910-P2700 is defective?

The airbag warning light lights up permanently or intermittently. In addition, there is a fault message in the instrument cluster, no connection to the diagnostic tool and a fault memory that cannot be cleared. In that case, the airbags and seatbelt pretensioners may not be able to deploy in an emergency.

In the event of a defect, the airbag warning light in the instrument cluster is the first thing that catches the eye. It must not be dismissed as trivial.

A diagnostic tool that receives no signal from the control unit indicates a fault that cannot be fixed by restarting.

Which vehicles is the 95910-P2700 fitted in?

The control unit 95910-P2700 is fitted in these vehicles: Kia Sorento MQ4 (from 2020).

The vehicles at a glance:

• Kia Sorento MQ4 (from 2020)

Compare the part number on the label of the removed unit with this page. This only confirms that it is the right unit. Also have the fault memory read out beforehand, because only the result shows whether the control unit itself is affected.

For the same vehicles, we also repair control units with the part numbers 95910-P2100, 95910-P4250.

How does the repair of the 95910-P2700 work?

To begin with, have the fault memory read out and enclose the log. Then disconnect the battery, afterwards remove the control unit and create a repair order online. Processing at Airbag24 usually takes 3–4 working days.

Airbag24 checks the unit you send in on the test bench, repairs defective components, erases the stored crash data and carries out a function test.

Afterwards your own unit goes back. Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-P2700 get to Airbag24?

Either you send the control unit 95910-P2700 yourself as a parcel, or you book a UPS collection for an extra charge. It comes back to you by UPS from Airbag24.

The printed repair order goes into the parcel. Pack the unit shock-proof.