Airbag control unit with part number 95910-P4300

What does the airbag control unit 95910-P4300 do?

In vehicles from Kia, the airbag control unit 95910-P4300 controls the restraint system (SRS). It evaluates the sensor signals, determines in an impact which airbags and seatbelt pretensioners are triggered, and checks the system without interruption. It shows a fault it has detected via the airbag warning light.

After an accident, it stores crash data and locks itself. The control unit thus has a direct effect on safety in the vehicle.

Why does the control unit 95910-P4300 fail?

The most common cause of the 95910-P4300 failing is crash data from an earlier accident, even if no airbag has been triggered; a normal diagnostic tool cannot erase it. Other causes are aging electronics, cold solder joints, moisture and voltage spikes.

Airbag24 erases the crash data during the repair. Which of these causes is present in an individual case is shown only by testing. The following causes come into consideration:

• Electronic components that age over time
• Cold solder joints on the circuit board
• Moisture or corrosion at the plug connections
• Voltage spikes, for example from a weak battery or jump-starting

How can you tell that the 95910-P4300 is defective?

A defect on the 95910-P4300 shows up as the airbag warning light in the instrument cluster staying on permanently or intermittently. An error message may also appear, the diagnostic tool may be denied access, and the fault memory may not be erasable.

As long as such a fault is present, the airbags and seatbelt pretensioners may not trigger in an emergency. Please have the warning checked promptly.

Which vehicles is the 95910-P4300 fitted in?

The control unit 95910-P4300 is fitted in these vehicles: Kia Sorento MQ4 (from 2020).

The list of vehicle types follows here:

• Kia Sorento MQ4 (from 2020)

Comparing the part number on the label of the removed unit with this page only shows that you have the correct unit in front of you. Have the fault memory read out before removal, because only the result shows whether the control unit is defective or whether a plug or cable is the cause.

For the same vehicles, we also repair control units with the part numbers 95910-P2100, 95910-P4250.

How does the repair of the 95910-P4300 work?

First have the fault memory read out and enclose the log. Only after disconnecting the battery do you remove the control unit 95910-P4300. Then create a repair order online and send in the well-packed unit.

At Airbag24 the unit is tested, defective components are replaced, stored crash data is erased and a function test is carried out. Processing takes 3–4 working days.

Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-P4300 get to Airbag24?

You send the control unit 95910-P4300 as a parcel, or you have it collected by UPS for an extra charge. After the repair, the return takes place by UPS.

Secure packaging against shocks is important, and the printed repair order belongs in the parcel.