Airbag control unit with part number 95910-PI610

What does the airbag control unit 95910-PI610 do?

The airbag control unit 95910-PI610 is the central control unit of the restraint system (SRS) for Hyundai. It processes signals from the crash sensors and decides in an accident on the triggering of airbags and seatbelt pretensioners. After an accident it stores crash data and locks itself.

The unit monitors the system continuously. If it detects a fault, it reports it via the airbag warning light and records the fault in the memory.

A failure can therefore lie in the control unit itself, but equally in connected parts. This distinction matters when it comes to the repair.

Why does the control unit 95910-PI610 fail?

Stored crash data is the most common cause for the 95910-PI610, even if no airbag has fired. Further causes are ageing electronic components, cold solder joints, moisture and corrosion at plug connections, and voltage spikes.

Crash data remains in the unit after the accident. A normal diagnostic tool cannot erase it; Airbag24 removes it during repair.

Other causes include ageing and wear of the components, poorly contacted solder joints and moisture at connectors. Voltage spikes, for example from a weak battery or when a jump start is connected, can also cause damage.

How can you tell that the 95910-PI610 is defective?

A defect in the 95910-PI610 shows on the airbag warning light in the instrument cluster, which lights up permanently or intermittently. Then the airbags and seatbelt pretensioners may not be able to deploy in a crash.

A fault message in the instrument cluster may accompany it. If the diagnostic tool shows no connection to the control unit, or the fault memory cannot be cleared, this confirms the suspicion.

The warning light reports the fault as soon as the system detects it. A test then clarifies whether the control unit, a connector or a cable is affected.

Which vehicles is the 95910-PI610 fitted in?

The control unit 95910-PI610 is fitted in these vehicles: Hyundai Ioniq 5 NE (2021-2024) and NE Facelift (from 2024).

Vehicles are assigned via this part number, which we have recorded. The list follows:

• Hyundai Ioniq 5 NE (2021-2024)
• Hyundai Ioniq 5 NE Facelift (from 2024)

Before removal, compare the number on the label with this page. That only confirms that you have the right unit. The fault memory must be read out beforehand, because only it shows whether the control unit is defective or whether a connector or cable is the cause.

For the same vehicles, we also repair control units with the part numbers 95910-GI110.

How does the repair of the 95910-PI610 work?

You read out the fault memory and attach the log, then disconnect the battery and remove the 95910-PI610. Afterwards create a repair order online and send the unit in well packed.

Airbag24 tests the unit on the test bench, repairs defective components, erases stored crash data and carries out a function test. Afterwards the unit goes back to you.

The processing time at Airbag24 is usually 3–4 working days. It refers only to this work.

Our repairs come with 2 years' statutory liability for defects.

The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-PI610 get to Airbag24?

You can send the control unit 95910-PI610 yourself as a parcel or book a UPS collection for an extra charge. After the repair Airbag24 sends it back to you by UPS.

Enclose the printed repair order with the parcel and pack the control unit shock-proof.