Airbag control unit with part number 95910-Q4100

What does the airbag control unit 95910-Q4100 do?

In the restraint system (SRS) of Kia, the airbag control unit 95910-Q4100 takes over control. In a collision it processes the sensor data within milliseconds and determines which airbags and seatbelt pretensioners are triggered. Irregularities in the system appear on the airbag warning light.

During operation the unit checks the connected components continuously. If it detects a fault, it stores it in the fault memory and displays it.

If an accident has occurred, the unit stores crash data and then remains locked. Only the repair lifts the lock.

Why does the control unit 95910-Q4100 fail?

The most common cause for 95910-Q4100 lies in crash data stored in memory after an accident, even if no airbag has deployed. Further causes are aged components, cold solder joints, moisture and corrosion at plugs, and voltage spikes, for example with a weak battery or a jump start.

A common diagnostic tool cannot erase the crash data. Airbag24 erases it during the repair.

The other causes lie in the area of the electronics and the connections. A corroded plug or a cold solder joint disturbs the signals just as an aged component does.

How can you tell that the 95910-Q4100 is defective?

A defect in the 95910-Q4100 shows itself in that the airbag warning light stays on or lights up intermittently, an error message appears in the instrument cluster, the diagnostic tool cannot reach the control unit, and the fault memory cannot be emptied. Airbags and seatbelt pretensioners may then not be able to deploy in an emergency.

Each of these indications comes from the system itself and is not a guess. The warning applies even when the vehicle can still be driven normally.

An error message that persists is a clear sign that a check is needed. Reading out the fault memory provides information about the recorded fault.

Which vehicles is the 95910-Q4100 fitted in?

This airbag control unit 95910-Q4100 is found in these vehicles: Kia Niro DE (2016-2022).

Here follows the list of models recorded for this part number.

• Kia Niro DE (2016-2022)

Matching the part number with the label only confirms that the unit is the right one. Whether the control unit itself is defective, or whether a plug or cable is the cause, is shown only by the fault memory. So have it read out beforehand.

For the same vehicles, we also repair control units with the part numbers 95910-G5000, 95910-G5100, 95910-G5200, 95910-G5400, 95910-G5500, 95910-H2000.

How does the repair of the 95910-Q4100 work?

First have the fault memory of the 95910-Q4100 read out and attach the log to the unit. Only after disconnecting the battery do you remove the control unit, and then create a repair order online and send the well-packed unit in. Airbag24 usually processes the order within 3–4 working days.

Airbag24 then checks your unit on the test bench, replaces defective components and erases the stored crash data. A function test concludes the work, after which your unit comes back to you.

Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-Q4100 get to Airbag24?

Shipment takes place as a parcel or as a UPS collection that you book for an extra charge. The return after the repair for the control unit 95910-Q4100 runs by UPS.

Print the repair order and put it into the parcel, and pack the unit shock-resistant.