Airbag control unit with part number 95910-Q4350

What does the airbag control unit 95910-Q4350 do?

The airbag control unit 95910-Q4350 is the central control unit of the restraint system (SRS) for Kia. It evaluates the signals from the crash sensors and decides within milliseconds in an accident which airbags and seatbelt pretensioners trigger.

In addition, the unit monitors the entire system continuously. If it detects a fault, it reports it via the airbag warning light in the instrument cluster, so that you notice it in time. To do this, it works closely with the sensors and the seatbelt pretensioners installed in the vehicle.

After an accident the control unit stores crash data and locks itself in this state.

Why does the control unit 95910-Q4350 fail?

The most common cause is crash data stored after an accident, even if no airbag triggered; a normal diagnostic tool cannot delete it. Ageing electronic components, cold solder joints, moisture and corrosion at plug connectors, and voltage spikes are further possible causes.

The other causes act over a longer period: electronic components age, solder joints can go cold, and moisture causes plug connectors to corrode.

Voltage spikes arise, for example, from a weak battery or from jump starting, and can strain the electronics even when the damage only becomes visible later.

How can you tell that the 95910-Q4350 is defective?

A defect shows itself through an airbag warning light in the instrument cluster that stays on permanently or intermittently, and through a fault message in the instrument cluster. In addition, the diagnostic tool gets no connection to the control unit, and the fault memory cannot be cleared.

In that case airbags and seatbelt pretensioners may possibly not trigger in an emergency. Do not treat the light as a minor matter; have the system checked promptly.

The light thus shows the defect by itself; a glance at the instrument cluster is enough to notice it.

Which vehicles is the 95910-Q4350 fitted in?

The airbag control unit 95910-Q4350 is fitted in these vehicles: Kia Niro DE (2016-2022). Whether it suits your car is most simply clarified via the label of the removed unit and the fault memory.

The following overview lists the vehicles on record for this part number.

• Kia Niro DE (2016-2022)

First compare the part number on the label of your removed unit with this page. That only ensures that you have the correct unit and says nothing about the cause. Therefore have the fault memory read out beforehand: only this log shows whether the control unit itself is defective or whether a plug or a cable is causing the problem.

For the same vehicles, we also repair control units with the part numbers 95910-G5000, 95910-G5100, 95910-G5200, 95910-G5400, 95910-G5500, 95910-H2000.

How does the repair of the 95910-Q4350 work?

First have the fault memory read out and enclose the log, then disconnect the battery and only then remove the control unit. Then create a repair order online and send in the unit well packed. Airbag24 generally needs 3–4 working days for checking, repair and function test.

Airbag24 checks the unit on the test bench, repairs defective components, deletes stored crash data and carries out a function test. Afterwards your own unit is returned to you.

Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-Q4350 get to Airbag24?

You send the airbag control unit 95910-Q4350 as a parcel or book a UPS collection for an extra charge. After the repair, Airbag24 sends it back to you by UPS.

Put the printed repair order into the parcel and pack the unit shock-proof.