Airbag control unit with part number 95910-Q5350

What does the airbag control unit 95910-Q5350 do?

The airbag control unit 95910-Q5350 is the central control unit of the SRS restraint system in Kia. It processes the crash sensor data, decides within milliseconds in the event of an impact which airbags and seatbelt pretensioners are triggered, and monitors the system without interruption.

If the unit detects a fault, it reports it via the airbag warning light. After an accident it stores crash data and locks itself afterwards.

Why does the control unit 95910-Q5350 fail?

The most common cause is crash data that remains in memory after an accident, even if no airbag has deployed. A standard diagnostic tool cannot erase it. Other causes include aged electronic components, cold solder joints, moisture and corrosion at plug connections, and voltage spikes from weak batteries or jump starts.

Stored crash data is not necessarily noticeable in everyday use. However, it stays in the unit even if the vehicle continues to drive afterwards.

Which cause is present is only decided by the test on the test bench. The fault memory is therefore only the first indication.

How can you tell that the 95910-Q5350 is defective?

The airbag warning light in the instrument cluster stays on continuously or intermittently. In addition, a fault message in the instrument cluster, no connection between the diagnostic tool and the control unit, and a fault memory that cannot be cleared may occur.

The warning light is the most important sign, as it reports the defect as soon as the system detects it. You should act promptly.

With such a defect, airbags and seatbelt pretensioners may possibly not deploy in an emergency.

Which vehicles is the 95910-Q5350 fitted in?

The 95910-Q5350 is fitted in these vehicles: Kia Seltos SP2 (from 2019).

The assignment lists the following vehicles:

• Kia Seltos SP2 (from 2019)

Compare the number on the label of the removed control unit with this page, then you know you have the right unit. Whether the unit itself is defective or a plug or cable is the cause only becomes clear once the fault memory has been read out. Therefore, have this done beforehand.

For the same vehicles, we also repair control units with the part numbers 80100-Q5600WK, 80100Q5600, 95910-Q5100-95512.

How does the repair of the 95910-Q5350 work?

First, read out the fault memory and enclose the log, then disconnect the battery and remove the control unit. Then create a repair order online and send in the well-packed unit. Airbag24 usually needs 3–4 working days for inspecting, repairing and testing.

Airbag24 tests the unit on the test bench, replaces defective components, erases the crash data and carries out a function test. Afterwards, your own unit is returned to you.

Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-Q5350 get to Airbag24?

Either you send the control unit 95910-Q5350 in as a parcel, or you book a UPS collection for an extra charge. Airbag24 sends it back to you via UPS after the repair.

Put the printed repair order into the parcel and pack the unit shockproof.