Airbag control unit with part number 95910-Q6000

What does the airbag control unit 95910-Q6000 do?

The airbag control unit 95910-Q6000 is the central control unit of the restraint system (SRS) for Kia. It evaluates the signals of the crash sensors, decides in an accident within milliseconds which airbags and seatbelt pretensioners are triggered, and monitors the entire system. It reports faults via the airbag warning light, and after an accident it stores crash data and locks itself.

The unit checks its surroundings continuously in the background. In everyday life you notice nothing of this as long as no fault is present.

Why does the control unit 95910-Q6000 fail?

Crash data stored after an accident is the most common cause, even if no airbag was triggered. Aged electronic components, cold solder joints, moisture and corrosion on connectors, and voltage spikes are also involved.

Crash data cannot be deleted with an ordinary diagnostic tool. Airbag24 deletes it during the repair.

Moisture and corrosion mainly affect the connectors, and solder joints can give way over time. A weak battery or a jump start can cause voltage spikes that stress the electronics.

How can you tell that the 95910-Q6000 is defective?

The airbag warning light in the instrument cluster lights up permanently or intermittently as soon as the control unit has stored a fault. An error message also appears in the instrument cluster, the diagnostic tool loses the connection, and the fault memory cannot be cleared.

In an emergency, airbags and seatbelt pretensioners may then fail to trigger. Please have the warning light checked promptly.

Which vehicles is the 95910-Q6000 fitted in?

The control unit 95910-Q6000 is fitted in these vehicles: Kia Seltos SP2 (from 2019). Which of them are affected can be found in the vehicle registration document.

The list in detail:

• Kia Seltos SP2 (from 2019)

Compare the part number on the label of the removed unit with this page. This confirms that it is the correct unit. Having the fault memory read out, on the other hand, shows whether the control unit itself is defective or whether a plug or a cable is the cause.

For the same vehicles, we also repair control units with the part numbers 80100-Q5600WK, 80100Q5600, 95910-Q5100-95512.

How does the repair of the 95910-Q6000 work?

First have the fault memory read out and attach the log. Then disconnect the battery, and only after that remove the control unit. Then create a repair order online and pack the unit well. Airbag24 checks it on the test bench, repairs defective components, deletes the crash data and carries out a function test. For checking, repairing and testing at Airbag24, 3–4 working days are planned.

Your own unit is then returned.

Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-Q6000 get to Airbag24?

You send the unit to Airbag24 as a parcel or book a UPS collection for an extra charge. After the repair, Airbag24 sends it back to you by UPS.

Put the printed repair order into the parcel and pack the control unit shock-proof.