Airbag control unit with part number 95910-Q6100

What does the airbag control unit 95910-Q6100 do?

The airbag control unit 95910-Q6100 controls the restraint system (SRS) in Kia. In a crash it evaluates the crash sensors and decides within milliseconds which airbags and seatbelt pretensioners are triggered.

Otherwise it checks the entire system continuously and shows faults via the airbag warning light.

After an accident it stores crash data and locks itself.

Why does the control unit 95910-Q6100 fail?

The most common cause on the 95910-Q6100 is crash data stored after an accident, even if no airbag has deployed. Other causes are aged components, cold solder joints, moisture and corrosion at plug connectors, and voltage spikes.

Crash data cannot be removed with an ordinary diagnostic tool. Airbag24 erases it during the repair.

Aged components and cold solder joints affect the inside of the electronics. Moisture and corrosion attack the plugs.

Voltage spikes, for example from a weak battery or a jump-start, can likewise lead to failure.

How can you tell that the 95910-Q6100 is defective?

The airbag warning light in the instrument cluster indicates a defect on the 95910-Q6100 when it lights up permanently or intermittently. A fault message in the instrument cluster, a diagnostic tool without connection to the control unit or a fault memory that cannot be cleared confirm this suspicion.

The warning light is clearly visible and can hardly be overlooked in everyday driving. If you notice it, have the finding checked.

In an emergency, airbags and seatbelt pretensioners may not deploy. This applies regardless of how well the car otherwise runs.

Which vehicles is the 95910-Q6100 fitted in?

The assignment applies to vehicles from Kia. The control unit 95910-Q6100 is fitted in these vehicles: Kia Seltos SP2 (from 2019).

These vehicles are stored for this part number:

• Kia Seltos SP2 (from 2019)

Compare the part number on the label of the removed unit with this page. That only tells you that you have the correct unit. Have the fault memory read out beforehand, because this log shows whether the control unit is faulty or whether a plug or cable is the cause.

For the same vehicles, we also repair control units with the part numbers 80100-Q5600WK, 80100Q5600, 95910-Q5100-95512.

How does the repair of the 95910-Q6100 work?

Airbag24 normally needs 3–4 working days for testing, repairing and checking the 95910-Q6100. Your steps run separately: read out the fault memory and enclose the log, then disconnect the battery and remove the control unit, and finally create the repair order online and send the unit in well packed.

Airbag24 tests the unit on the test bench, replaces defective components, erases stored crash data and carries out a function test. Afterwards your own unit is sent back.

Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-Q6100 get to Airbag24?

You can send the control unit 95910-Q6100 in as a parcel or have it collected by UPS for an extra charge. Airbag24 returns it to you by UPS after the repair.

The printed repair order goes into the parcel; you pack the unit shock-resistant.