Airbag control unit with part number 95910-Q6200

What does the airbag control unit 95910-Q6200 do?

The airbag control unit 95910-Q6200 takes over control of the restraint system (SRS) at Kia. It reads the crash sensors, decides in a crash within milliseconds whether airbags and seatbelt pretensioners are triggered, and shows faults via the airbag warning light.

In addition, the unit checks sensors, output stages and wiring during operation. If it finds an irregularity, it writes it to the fault memory.

After an accident it stores crash data and locks itself.

Why does the control unit 95910-Q6200 fail?

The cause is most often crash data stored after an accident, even if no airbag fired. Ageing electronics, cold solder joints, moisture and corrosion at plug connections, and voltage spikes come on top of this.

A commercially available diagnostic tool does not remove crash data. Airbag24 erases it during the repair.

The other triggers are closely linked to the age of the components, the environment in the vehicle and the power supply. A weak battery or connecting via jump-start can create voltage spikes that strain the electronics.

How can you tell that the 95910-Q6200 is defective?

Typical signs are an airbag warning light that stays on permanently or intermittently, and a fault message in the instrument cluster. In an emergency, airbags and seatbelt pretensioners may then fail to trigger.

The signs in detail:

• Airbag warning light in the instrument cluster
• Diagnostic tool finds no connection to the control unit
• Fault memory cannot be cleared

As soon as the light comes on, have the system checked promptly.

Which vehicles is the 95910-Q6200 fitted in?

At Kia the control unit 95910-Q6200 is fitted in these vehicles: Kia Seltos SP2 (from 2019).

These models are part of this:

• Kia Seltos SP2 (from 2019)

Clarify two things in advance. Compare the part number on the label with this page; this only ensures that it is the correct unit. Also have the fault memory read out, because only this result shows whether the control unit is defective or whether a plug or cable is the cause.

For the same vehicles, we also repair control units with the part numbers 80100-Q5600WK, 80100Q5600, 95910-Q5100-95512.

How does the repair of the 95910-Q6200 work?

You have the fault memory read out and enclose the log. Then disconnect the battery and only then remove the unit. Next, create a repair order online and send the unit in well packed.

Airbag24 checks the unit on the test bench and replaces defective components. Stored crash data is erased, followed by a function test.

Processing at Airbag24 usually takes 3–4 working days, after which your own unit goes back to you. Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-Q6200 get to Airbag24?

Either you send the unit in as a parcel or you book a UPS collection for an extra charge. After the repair, Airbag24 returns it to you by UPS.

Put the printed repair order in the parcel and pack the unit shockproof.