Airbag control unit with part number 95910-Q6210

What does the airbag control unit 95910-Q6210 do?

The airbag control unit 95910-Q6210 is the control unit of the restraint system (SRS) of Kia. It processes the signals from the crash sensors and decides in a crash which airbags and seatbelt pretensioners are triggered.

The control unit also monitors the entire system continuously and reports faults via the airbag warning light.

After an accident, it stores crash data and locks itself. This lock is lifted only by the repair.

Why does the control unit 95910-Q6210 fail?

The most common cause is crash data stored after an accident, even if no airbag has deployed, because a diagnostic tool cannot erase it. Other possible causes are aged electronic components, cold solder joints, moisture and corrosion at plug connections, and voltage spikes from a weak battery or a jump start.

Crash data therefore remains stored in the unit until Airbag24 erases it during the repair.

Aged electronic components, cold solder joints, and moisture and corrosion at plug connections can also be triggers, even without an accident.

Voltage spikes additionally stress the electronics. Only the test shows which cause is present.

How can you tell that the 95910-Q6210 is defective?

A defect in the 95910-Q6210 shows itself through the airbag warning light, an error message in the instrument cluster, a diagnostic tool without a connection to the control unit, or a fault memory that cannot be cleared. In an emergency, the airbags and seatbelt pretensioners may then fail to deploy.

• airbag warning light in the instrument cluster stays on or comes on intermittently
• diagnostic tool does not connect to the control unit
• error message in the instrument cluster
• fault memory cannot be cleared

The warning light is the sign you are most likely to notice in everyday use, and it indicates the fault. Take it seriously.

Have such signs checked promptly, even if the vehicle otherwise seems inconspicuous.

Which vehicles is the 95910-Q6210 fitted in?

The 95910-Q6210 is fitted in these vehicles: Kia Seltos SP2 (from 2019).

The vehicles stored for this part number can be found here.

• Kia Seltos SP2 (from 2019)

Compare the part number on the label of your removed unit with this page to make sure you have the right unit. Also have the fault memory read out before you remove anything. Only this result shows whether the control unit is defective or whether a plug or cable is the cause.

For the same vehicles, we also repair control units with the part numbers 80100-Q5600WK, 80100Q5600, 95910-Q5100-95512.

How does the repair of the 95910-Q6210 work?

The repair of the 95910-Q6210 follows a fixed order that serves your safety. At Airbag24, processing usually takes 3–4 working days.

Have the fault memory read out, attach the log to the unit and then disconnect the battery. Only then remove the control unit. Next, create a repair order online and send the well-packed unit in.

At Airbag24, the unit is tested on the test bench, defective components are replaced, the stored crash data is erased and a function test is carried out. After that, your own unit is sent back to you. The 3–4 working days apply only to checking, repairing and testing at Airbag24.

Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-Q6210 get to Airbag24?

You send the 95910-Q6210 as a parcel or have it collected by UPS for an extra charge. After the repair, Airbag24 sends it back to you by UPS.

Put the printed repair order into the parcel, and pack the unit shockproof.