Airbag control unit with part number 95910-Q6300

What does the airbag control unit 95910-Q6300 do?

The airbag control unit 95910-Q6300 is the switching point of the restraint system (SRS) of Kia. It processes the signals from the crash sensors and, in the event of an accident, decides within milliseconds whether airbags and seatbelt pretensioners are triggered.

It checks the system continuously and shows faults via the airbag warning light in the instrument cluster.

After an accident, the unit stores crash data and locks itself.

Why does the control unit 95910-Q6300 fail?

The most common cause is crash data stored after an accident, even if no airbag was triggered. Other causes include aged electronics, cold solder joints, moisture and corrosion at plug connections, and voltage spikes.

A standard diagnostic tool cannot erase this crash data. The unit therefore keeps it until a repair removes it.

Voltage spikes occur, for example, with a weak battery or when jump-starting a vehicle. The examination will show which cause applies to your unit.

How can you tell that the 95910-Q6300 is defective?

A defect shows up as an airbag warning light that stays on permanently or intermittently, as an error message in the instrument cluster, and as a diagnostic tool with no connection. A fault memory that cannot be cleared also belongs to this. In an emergency, airbags and seatbelt pretensioners may then fail to trigger.

• Airbag warning light stays on permanently or intermittently
• Error message in the instrument cluster
• No connection to the diagnostic tool
• Fault memory cannot be cleared

The warning light reports the fault on its own. Therefore, watch it on every journey.

Which vehicles is the 95910-Q6300 fitted in?

The control unit 95910-Q6300 is fitted in these vehicles: Kia Seltos SP2 (from 2019).

These vehicles are on record for this part number:

• Kia Seltos SP2 (from 2019)

Comparing the part number on the label of the removed unit with this page only confirms that it is the right unit. Have the fault memory read out beforehand: only the result shows whether the control unit itself is defective or whether a plug or cable is the cause.

For the same vehicles, we also repair control units with the part numbers 80100-Q5600WK, 80100Q5600, 95910-Q5100-95512.

How does the repair of the 95910-Q6300 work?

First, have the fault memory read out and attach the log. Then disconnect the battery and remove the control unit. Next, create a repair order online and send the unit in well packed.

Airbag24 checks the unit on the test bench, replaces defective components, erases the stored crash data and carries out a function test. Afterwards, your own control unit is returned to you.

Processing at Airbag24 usually takes 3–4 working days, counted for checking, repairing and testing.

Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-Q6300 get to Airbag24?

You send the control unit as a parcel or book UPS collection for an extra charge. After the repair, Airbag24 returns it to you by UPS.

Put the printed repair order in the parcel and pack the unit shockproof.