Airbag control unit with part number 95910-Q6310

What does the airbag control unit 95910-Q6310 do?

The control unit 95910-Q6310 is the control centre of the restraint system (SRS) in the airbag system for Kia. It evaluates crash sensors, decides in an accident on airbags and seatbelt pretensioners, and monitors the system continuously. After an accident, it stores crash data and locks itself.

As the airbag control unit, it controls the firing circuits of the airbag modules and seatbelt pretensioners and checks these circuits continuously for interruptions or short circuits.

It shows faults via the airbag warning light. The lock after an accident ends only with the repair at Airbag24.

Why does the control unit 95910-Q6310 fail?

Stored crash data after an accident are the most common cause, even if no airbag was triggered, and a normal diagnostic tool cannot erase them. Aged components, cold solder joints, moisture and corrosion at plug connections, as well as voltage spikes from a weak battery or jump-starting, also play a role.

Crash data remain stored as long as no one erases them. Airbag24 erases them during the repair.

The other causes concern the electronics and their connections. A damp plug or a weak battery strains the unit much like the age of its components.

How can you tell that the 95910-Q6310 is defective?

The airbag warning light in the instrument cluster stays on permanently or only intermittently, an error message appears in the instrument cluster, the diagnostic tool cannot reach the control unit, and a fault memory cannot be cleared. Then airbags and seatbelt pretensioners may not trigger in an emergency.

The warning light is the sign you are most likely to notice, and it reports the fault as soon as the system detects it. Do not delay the readout when the light comes on.

Which vehicles is the 95910-Q6310 fitted in?

The control unit 95910-Q6310 is fitted in these vehicles: Kia Seltos SP2 (from 2019).

The list shows the vehicles for this part number:

• Kia Seltos SP2 (from 2019)

First, compare the part number on the label of the removed unit with this page; this only confirms that it is the right unit. Second, have the fault memory read out beforehand, because only this shows whether the control unit is defective or whether a plug or cable is the cause.

For the same vehicles, we also repair control units with the part numbers 80100-Q5600WK, 80100Q5600, 95910-Q5100-95512.

How does the repair of the 95910-Q6310 work?

Have the fault memory read out first and attach the log; then disconnect the battery and only after that remove the control unit. Then create a repair order online and send the unit in well packed. Airbag24 needs 3–4 working days for checking, repairing and testing.

We check the unit on the test bench, renew defective components, erase the stored crash data and carry out a function test. Afterwards your own unit goes back to you.

Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-Q6310 get to Airbag24?

You send the unit 95910-Q6310 as a parcel or book UPS collection for an extra charge. After the repair, Airbag24 returns it to you by UPS.

The printed repair order belongs in the parcel, and the unit must be packed shockproof.