Airbag control unit with part number 95910-Q6410

What does the airbag control unit 95910-Q6410 do?

The airbag control unit 95910-Q6410 coordinates the restraint system (SRS) in the Kia. It reads the crash sensors and decides in an accident, within milliseconds, which airbags and seatbelt pretensioners fire.

It checks the system constantly during operation. If it detects a fault, it shows it via the airbag warning light in the instrument cluster.

After an accident it stores crash data and locks itself. Only the repair lifts the lock.

Why does the control unit 95910-Q6410 fail?

The most common cause is crash data after an accident, even when no airbag has deployed. A normal diagnostic tool cannot erase it. Further causes are briefly summarised:

• Ageing electronic components
• Cold solder joints
• Moisture and corrosion on plug connections
• Voltage spikes from a weak battery or a jump start

Airbag24 removes the crash data during the repair. The other causes concern the electronics and the connections within the unit.

How can you tell that the 95910-Q6410 is defective?

The airbag warning light in the instrument cluster stays on permanently or intermittently, and an error message appears. The diagnostic tool gets no connection to the control unit, and the fault memory cannot be cleared. Airbags and seatbelt pretensioners may then possibly fail to deploy in an emergency.

The warning light is the first indication you will see. Have it clarified before taking any further steps.

Which vehicles is the 95910-Q6410 fitted in?

The 95910-Q6410 is fitted in these vehicles: Kia Seltos SP2 (from 2019). All details relate to the Kia make.

The list shows the vehicles assigned to this part number.

• Kia Seltos SP2 (from 2019)

Compare the part number on the label of the removed unit with this page, so you know it is the correct unit. Whether the control unit is defective, or whether a connector or a cable is the cause, is shown only by the fault memory, which you have read out beforehand.

For the same vehicles, we also repair control units with the part numbers 80100-Q5600WK, 80100Q5600, 95910-Q5100-95512.

How does the repair of the 95910-Q6410 work?

First have the fault memory read out and include the log. Then disconnect the battery and remove the control unit. Processing at Airbag24 usually takes 3–4 working days.

Afterwards create a repair order online and pack the unit well. Airbag24 checks it on the test bench, repairs the faults in the affected components, deletes the crash data and carries out a function test.

Your own unit goes back to you afterwards. Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-Q6410 get to Airbag24?

You send the unit as a parcel or book a UPS collection for an extra charge. After the repair, Airbag24 sends it back via UPS.

Put the printed repair order in the parcel and pack the control unit shockproof.