Airbag control unit with part number 95910-Q6750

What does the airbag control unit 95910-Q6750 do?

The 95910-Q6750 is the central control unit of the restraint system (SRS) in Kia. Within milliseconds it decides, based on the crash sensors, which airbags and seatbelt pretensioners are triggered, and it monitors the system without pause.

The control unit evaluates the sensor signals as soon as an impact occurs, and it indicates faults in the system via the airbag warning light in the instrument cluster.

After an accident it creates crash data and locks itself. Only the repair lifts this lock.

Why does the control unit 95910-Q6750 fail?

The most common cause of a failure of the 95910-Q6750 is crash data from an accident, even if no airbag was triggered. Aged components, cold solder joints, moisture and corrosion at plug connections, and voltage spikes are also possible causes.

Crash data cannot be erased with a standard diagnostic tool. During the repair by Airbag24 it is erased.

Electronic components age, and solder joints can go cold over time. Moisture and corrosion attack plug connections. Voltage spikes, for example from a weak battery or from jump-starting with external power, also affect the unit.

How can you tell that the 95910-Q6750 is defective?

The airbag warning light in the instrument cluster stays on permanently or intermittently, and an error message appears in the instrument cluster. In addition, the diagnostic tool cannot establish a connection to the 95910-Q6750, and the fault memory cannot be cleared.

In such a case, airbags and seatbelt pretensioners may not trigger in an emergency. The warning light shows this condition directly.

A prompt check is therefore the right step before any further journeys.

Which vehicles is the 95910-Q6750 fitted in?

The 95910-Q6750 is fitted in the following vehicle: Kia Seltos SP2 (from 2019).

You will find the assignment to this vehicle in the overview below:

• Kia Seltos SP2 (from 2019)

Compare the part number from the label of the removed unit with this page. This only clarifies whether it is the right unit. Have the fault memory read out beforehand, because this result alone shows whether the control unit is defective or whether a connector or a cable is the cause.

For the same vehicles, we also repair control units with the part numbers 80100-Q5600WK, 80100Q5600, 95910-Q5100-95512.

How does the repair of the 95910-Q6750 work?

Processing at Airbag24 usually takes 3–4 working days. First you have the fault memory read out and attach the log. Then you disconnect the battery, remove the 95910-Q6750 and send it in well packed after creating the repair order.

On the test bench, Airbag24 checks the unit, repairs defective components, erases the stored crash data and tests the function. Afterwards Airbag24 returns the unit to you.

Our repairs come with 2 years' statutory liability for defects.

The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-Q6750 get to Airbag24?

You send the 95910-Q6750 to Airbag24 as a parcel or have it collected by UPS for an extra charge. After the repair, UPS brings the unit back to you.

The printed repair order goes into the parcel, and you pack the control unit shock-proof.