Airbag control unit with part number 95910-Q6800

What does the airbag control unit 95910-Q6800 do?

The airbag control unit 95910-Q6800 is the control centre of the restraint system (SRS) of Kia. It processes the signals from the crash sensors, determines in a collision within milliseconds whether airbags and seatbelt pretensioners are triggered, and checks the system continuously.

A fault is indicated via the airbag warning light in the instrument cluster. The unit stores the fault data in its memory.

After an accident, the unit stores crash data and locks itself.

Why does the control unit 95910-Q6800 fail?

In the 95910-Q6800, the most common cause lies in crash data stored after an accident, even if no airbag has deployed. Further causes are ageing electronic components, cold solder joints, moisture and corrosion at plug connections, and voltage spikes.

Stored crash data remains in the unit, and a normal diagnostic tool cannot remove it. Airbag24 erases it during the repair.

The other triggers lie in the electrics. Ageing components and cold solder joints belong to them, as does moisture at the plugs. Voltage spikes arise, for example, from a weak battery or when connecting a jump start.

How can you tell that the 95910-Q6800 is defective?

You recognise a defect in the 95910-Q6800 by the airbag warning light in the instrument cluster, which lights up intermittently or permanently. A fault message in the instrument cluster, no connection to the diagnostic tool, or a fault memory that cannot be cleared also belong to the signs.

In an emergency, airbags and seatbelt pretensioners may fail to trigger in the event of a defect. You should therefore take the warning light seriously and have the cause checked promptly.

Which vehicles is the 95910-Q6800 fitted in?

The control unit 95910-Q6800 is fitted in these vehicles: Kia Seltos SP2 (from 2019). The assignment depends on the part number of the removed unit.

These vehicles are assigned to the part number:

• Kia Seltos SP2 (from 2019)

Comparing the part number on the label of the removed unit with this page only ensures that it is the correct unit. Have the fault memory read out beforehand, because only it shows whether the control unit is defective or whether a plug or cable is the cause.

For the same vehicles, we also repair control units with the part numbers 80100-Q5600WK, 80100Q5600, 95910-Q5100-95512.

How does the repair of the 95910-Q6800 work?

Have the fault memory read out and enclose the log. Then disconnect the battery and only then remove the control unit. Next, create a repair order online and send the unit in well packed.

Airbag24 examines the unit on the test bench, repairs defective components, erases the stored crash data and carries out a function test. Checking, repairing and testing usually take 3–4 working days at Airbag24.

Your own unit is returned to you afterwards. Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-Q6800 get to Airbag24?

You send the control unit as a parcel, or book a UPS collection for an extra charge. After the repair, Airbag24 returns the unit to you by UPS.

Put the printed repair order into the parcel and pack the unit shockproof.