Airbag control unit with part number 95910-Q6900

What does the airbag control unit 95910-Q6900 do?

The airbag control unit 95910-Q6900 coordinates the restraint system (SRS) of Kia. In an accident, it processes the crash sensor signals and decides within milliseconds on airbags and seatbelt pretensioners. In normal operation, it monitors all components and reports faults via the airbag warning light.

After an accident, it stores crash data and locks itself. Only a repair lifts the lock again.

The unit checks itself and its surroundings continuously. Whatever it finds is stored in the fault memory.

Why does the control unit 95910-Q6900 fail?

The most common cause is crash data stored after an accident, even without an airbag having deployed. Ageing components, cold solder joints, moisture and corrosion, and voltage spikes are also possible.

• Ageing electronic components
• Cold solder joints
• Moisture and corrosion at plug connectors
• Voltage spikes, for example from a weak battery or a jump start

Crash data cannot be erased with a standard diagnostic tool. Airbag24 removes it as part of the repair.

The specific cause in an individual case is determined by the test on the unit.

How can you tell that the 95910-Q6900 is defective?

A defect shows up as an airbag warning light that stays on permanently or lights up intermittently, as error messages in the instrument cluster, as a missing connection to the diagnostic tool, or as a fault memory that cannot be cleared. In an emergency, airbags and seatbelt pretensioners may then fail to deploy.

• Airbag warning light on, permanently or intermittently
• Error message in the instrument cluster
• Diagnostic tool finds no connection to the control unit
• Fault memory cannot be cleared

These signs call for a check, even if the vehicle otherwise appears unremarkable.

Which vehicles is the 95910-Q6900 fitted in?

The control unit 95910-Q6900 is fitted in these vehicles: Kia Seltos SP2 (from 2019).

For this part number, Airbag24 has stored these models:

• Kia Seltos SP2 (from 2019)

Compare the part number on the label of the unit with this page. That only confirms that you have the right unit. Have the fault memory read out beforehand; only this result shows whether the control unit is defective or whether a plug or a cable is the cause.

For the same vehicles, we also repair control units with the part numbers 80100-Q5600WK, 80100Q5600, 95910-Q5100-95512.

How does the repair of the 95910-Q6900 work?

First, have the fault memory read out. Enclose the log with the parcel. Then disconnect the battery, and only then remove the control unit 95910-Q6900. After that, send the unit in following the repair order you created online.

At Airbag24, the unit is checked on the test bench, defective components are repaired, the crash data is erased and a function test is carried out. After that, the unit goes back to you.

Processing usually takes 3–4 working days. Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-Q6900 get to Airbag24?

You choose between sending the parcel yourself and a UPS collection, which is booked for an extra charge. The return after the repair is made by UPS.

Place the printed repair order in the parcel, then pack the unit shockproof.