Airbag control unit with part number 95910-R0010

What does the airbag control unit 95910-R0010 do?

The airbag control unit 95910-R0010 coordinates the SRS restraint system of Kia. It processes the readings from the crash sensors and, in a crash, decides within milliseconds which airbags and seatbelt pretensioners to trigger.

It also monitors the entire system constantly. If it detects a fault, the airbag warning light in the instrument cluster comes on.

After a crash, the unit stores crash data and locks itself.

Why does the control unit 95910-R0010 fail?

Crash data stored in the unit after an accident is the most common cause, even if no airbag was triggered. Aged electronic components, cold solder joints, moisture at plug connectors and voltage spikes are also possible causes.

Crash data cannot be erased with a standard diagnostic tool. It therefore remains stored in the unit.

Moisture and corrosion at connectors, cold solder joints or voltage spikes, for example from a weak battery or a jump start, can also lead to failure. Which cause applies in each case only becomes clear during testing.

How can you tell that the 95910-R0010 is defective?

Typical signs are an airbag warning light that stays on permanently or intermittently, and a fault message in the instrument cluster. A defect is also indicated if the diagnostic tool cannot establish a connection to the control unit or the fault memory cannot be cleared.

• Airbag warning light on permanently or intermittently
• Fault message in the instrument cluster
• Diagnostic tool receives no connection to the control unit
• Fault memory cannot be cleared

In the event of a defect, the airbags and seatbelt pretensioners may not trigger in an emergency. Take these signs seriously and have the diagnosis checked.

Which vehicles is the 95910-R0010 fitted in?

The control unit is fitted in Kia vehicles, specifically in the following vehicle: Kia Carnival KA4 (from 2020). There it works as part of the restraint system.

You will find the matching vehicle in this overview:

• Kia Carnival KA4 (from 2020)

Comparing the part number on the label with this page only shows whether you have removed the correct unit. Whether the control unit itself is defective is revealed only by the fault memory, which you should have read out before removal. A plug or a cable can also be the cause.

For the same vehicles, we also repair control units with the part numbers 95910-R0100.

How does the repair of the 95910-R0010 work?

Processing at Airbag24 usually takes 3–4 working days. Your first step is to have the fault memory read out, with the enclosed log, and then disconnect the battery.

Then remove the control unit and create a repair order online.

Send the well-packed unit to Airbag24.

Airbag24 checks the control unit on the test bench, repairs defective components, erases stored crash data and carries out a function test.

Afterwards your own unit is returned to you.

Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-R0010 get to Airbag24?

You send the unit as a parcel. Alternatively, you can book a UPS collection for an extra charge. Airbag24 sends it back by UPS after the repair.

Put the printed repair order into the parcel, and pack the control unit shock-proof.