Airbag control unit with part number 95910-R0030

What does the airbag control unit 95910-R0030 do?

The airbag control unit 95910-R0030 coordinates the SRS restraint system of Kia. It evaluates the crash sensors, determines in an accident which airbags and seatbelt pretensioners trigger, and monitors the entire system continuously.

If the unit outputs a fault, the airbag warning light in the instrument cluster comes on. The decision on triggering is made within milliseconds.

After an accident, the unit secures crash data and locks itself.

Why does the control unit 95910-R0030 fail?

Stored crash data is the most common cause, even if no airbag has triggered in the accident. Other causes are aged electronics, cold solder joints, moisture and corrosion at plug connections, and voltage spikes.

A normal diagnostic tool cannot erase the crash data. Airbag24 erases it as part of the repair.

The other causes are general: components age, solder joints can stay cold, and moisture or corrosion attacks plug connections. Briefly excessive voltages, as they occur with a weak battery or jump-starting, also stress the unit.

How can you tell that the 95910-R0030 is defective?

A defect shows up as the airbag warning light in the instrument cluster lighting up permanently or intermittently. In addition there is a fault message in the instrument cluster, no connection to the diagnostic tool, and a fault memory that cannot be cleared.

The signs in detail:

• Airbag warning light on permanently or intermittently
• Fault message in the instrument cluster
• Diagnostic tool receives no connection to the control unit
• Fault memory cannot be cleared

In an emergency, airbags and seatbelt pretensioners may then not trigger.

Which vehicles is the 95910-R0030 fitted in?

A vehicle model is stored for this part number. The control unit 95910-R0030 is fitted in these vehicles: Kia Carnival KA4 (from 2020).

The list of vehicles:

• Kia Carnival KA4 (from 2020)

Keep the number on the label next to this page and check whether it matches. This only shows that it is the correct unit. Have the fault memory read out beforehand; only this log shows whether the control unit is defective or whether a plug or cable is the cause.

For the same vehicles, we also repair control units with the part numbers 95910-R0100.

How does the repair of the 95910-R0030 work?

First have the fault memory read out and attach the log. Then disconnect the battery and only then remove the control unit. Create the repair order online before you send in the well-packed unit.

There, the unit is checked, defective components are replaced, crash data is erased and a function test is carried out. Afterwards your own unit goes back to you. Processing takes 3–4 working days in general and covers only checking, repairing and testing.

Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-R0030 get to Airbag24?

The unit comes to Airbag24 as a parcel, or you book a UPS collection for an extra charge. After the repair, Airbag24 sends it back by UPS.

Enclose the printed repair order in the parcel. Pack the control unit shock-resistant.