Airbag control unit with part number 95910-R0110

What does the airbag control unit 95910-R0110 do?

Within the restraint system (SRS) of Kia the airbag control unit 95910-R0110 acts as the central switching unit. It reads the crash sensors, determines within milliseconds which airbags and seatbelt pretensioners are triggered, and monitors the entire system. After an accident it stores crash data and locks itself.

The unit passes on any faults it finds via the airbag warning light in the instrument cluster, so that the driver notices the problem.

Why does the control unit 95910-R0110 fail?

Crash data after an accident is the most common cause in the 95910-R0110, even if no airbag has deployed; a normal diagnostic tool cannot reach it. Added to this are ageing electronic components, cold solder joints, moisture and corrosion at plug connectors, and voltage spikes such as those caused by a weak battery or a jump start.

They come directly from the accident and remain in the unit. A standard reader does not remove them either.

Ageing, moisture and corrosion weaken the connections over time. Voltage spikes can stress components that otherwise work reliably. Such causes cannot be reliably told apart without testing.

How can you tell that the 95910-R0110 is defective?

The airbag warning light in the instrument cluster lights up permanently or intermittently, a fault message appears in the instrument cluster, the diagnostic tool cannot establish a connection with the control unit, and the fault memory remains. In an emergency, airbags and seatbelt pretensioners may therefore not deploy.

When the warning light comes on, the system is reporting a fault it has detected itself. Fault messages in the instrument cluster and a diagnostic tool that does not respond then serve as further indications.

A fault that only occurs intermittently is therefore not harmless. Taking the light seriously and having the system checked is the right step.

Which vehicles is the 95910-R0110 fitted in?

The control unit 95910-R0110 is fitted in the following vehicles: Kia Carnival KA4 (from 2020).

Here is the list of vehicles for which this part number is recorded:

• Kia Carnival KA4 (from 2020)

Compare the part number on the label of the removed unit with this page, and you will know that you have the correct unit. Whether the control unit is defective, or a connector or a cable is the cause, is only clarified by the fault log read out beforehand.

For the same vehicles, we also repair control units with the part numbers 95910-R0100.

How does the repair of the 95910-R0110 work?

Before you remove anything, have the fault memory of the 95910-R0110 read out and attach the log to the unit. Then disconnect the battery, only then remove the control unit and create a repair order online. Then send in the well-packed unit.

At Airbag24 the unit goes onto the test bench. Defective components are repaired, stored crash data is erased and a function test is carried out. The unit then goes back to you.

Airbag24 generally allows 3–4 working days for checking, repairing and testing. Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-R0110 get to Airbag24?

The control unit 95910-R0110 reaches Airbag24 either as a parcel or via a UPS collection booked for an extra charge. After the repair UPS brings it back to you.

Padded and shock-proof packed, the unit goes on its way, with the printed repair order enclosed.