Airbag control unit with part number 95910-R0510

What does the airbag control unit 95910-R0510 do?

The airbag control unit 95910-R0510 is the central control unit of the SRS restraint system for Kia. It evaluates the crash sensors and, in an accident, decides within milliseconds which airbags and seatbelt pretensioners are triggered.

It also monitors the system continuously. If the monitoring detects a fault, this is shown by the airbag warning light in the instrument cluster.

After an accident, the unit stores crash data and locks itself. This applies regardless of whether an airbag has been triggered.

Why does the control unit 95910-R0510 fail?

The most common cause is crash data stored after an accident, even if no airbag has been triggered. Other causes include aged electronic components, cold solder joints, moisture and corrosion at plug connections, and voltage spikes.

Crash data cannot be erased with a normal diagnostic tool. Airbag24 erases it during the repair.

Voltage spikes arise, for example, from a weak battery or a jump start. The other causes cannot be reliably read from the unit itself; only the test shows them.

How can you tell that the 95910-R0510 is defective?

A defect shows up as the airbag warning light in the instrument cluster lighting up permanently or intermittently, as a fault message in the instrument cluster, or as no connection between the diagnostic tool and the control unit.

• Airbag warning light lights up permanently or intermittently
• Fault message in the instrument cluster
• Diagnostic tool gets no connection to the control unit
• Fault memory cannot be erased

In an emergency, airbags and seatbelt pretensioners may then fail to trigger. Therefore have the warning checked promptly.

Which vehicles is the 95910-R0510 fitted in?

The control unit 95910-R0510 is fitted in these vehicles: Kia Carnival KA4 (from 2020).

These vehicles are recorded with this part number:

• Kia Carnival KA4 (from 2020)

Compare the part number on the label of the removed unit with this page. This only ensures that you have the right unit. Have the fault memory read out beforehand, because only it shows whether the control unit is defective or a plug or cable is the cause.

For the same vehicles, we also repair control units with the part numbers 95910-R0100.

How does the repair of the 95910-R0510 work?

First have the fault memory read out and enclose the report. Then disconnect the battery and remove the control unit. Next, create a repair order online and send in the well-packed unit. Processing at Airbag24 usually takes 3–4 working days.

Airbag24 checks the unit on the test bench, rectifies the fault in the defective components, erases stored crash data and carries out a function test. The unit then goes back to you.

Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-R0510 get to Airbag24?

You send the control unit in as a parcel or book a UPS collection for an extra charge. After the repair, Airbag24 sends it back to you by UPS.

Put the printed repair order in the parcel and pack the unit shock-proof.