Airbag control unit with part number 95910-R0530

What does the airbag control unit 95910-R0530 do?

The 95910-R0530 is the control unit of the restraint system (SRS) of Kia. It processes the signals from the crash sensors and, in a crash, triggers the appropriate airbags and seatbelt pretensioners within milliseconds.

In continuous operation it monitors the system and displays faults via the airbag warning light.

After an accident it stores crash data and switches into the locked state.

Why does the control unit 95910-R0530 fail?

The most common cause with the 95910-R0530 is the storage of crash data after an accident, even if no airbag was triggered. Other causes are aged electronics, cold solder joints, moisture and corrosion at plugs, and voltage spikes.

Crash data cannot be erased with a standard diagnostic tool. Airbag24 erases it during the repair.

Aged electronics and cold solder joints are typical weak points on the circuit board, whose connections can loosen over time.

Moisture and corrosion at plugs lead to contact problems. Voltage spikes, for example from a weak battery or a jump start, put additional strain on the electronics.

How can you tell that the 95910-R0530 is defective?

The airbag warning light in the instrument cluster stays on permanently or intermittently, and a fault message appears in the instrument cluster as well. In addition, the diagnostic tool finds no connection to the 95910-R0530, and the fault memory cannot be cleared.

With these signs, airbags and seatbelt pretensioners may not trigger in an emergency.

Only the fault memory shows whether the control unit itself is affected. A damaged plug or a cable can cause the same symptoms.

Which vehicles is the 95910-R0530 fitted in?

The 95910-R0530 is fitted in these vehicles: Kia Carnival KA4 (from 2020).

The list in which the vehicles for this part number appear follows directly below.

• Kia Carnival KA4 (from 2020)

Comparing the part number on the label of the removed unit with this page shows that you have the correct unit. It does not clarify the cause, though. For that, the fault memory must have been read out beforehand, since it shows whether the control unit is defective or whether a plug or cable is the cause.

For the same vehicles, we also repair control units with the part numbers 95910-R0100.

How does the repair of the 95910-R0530 work?

Checking, repairing and testing at Airbag24 usually takes 3–4 working days. Beforehand, have the fault memory read out and enclose the log, disconnect the battery and then remove the 95910-R0530. Then create a repair order online and send the unit in well packed.

Airbag24 checks the unit on the test bench, repairs defective components, erases the crash data and tests the function. Afterwards you receive your own unit back.

Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-R0530 get to Airbag24?

You send the 95910-R0530 as a parcel or book a UPS collection for an extra charge, and Airbag24 returns the unit to you by UPS after the repair.

Put the printed repair order in the parcel and pack the control unit shock-proof.