Airbag control unit with part number 95910-R0610

What does the airbag control unit 95910-R0610 do?

The airbag control unit 95910-R0610 steers the restraint system (SRS) for Kia. It checks the signals from the crash sensors and, in an accident, determines which airbags and seatbelt pretensioners are triggered. After an accident it stores crash data and locks itself; the repair lifts this lock.

The unit also monitors the system during normal operation. Faults are displayed via the airbag warning light in the instrument cluster so that you can respond.

Without functioning control, the system cannot make a reliable decision in an emergency. This is precisely why the control unit is so central to the system.

Why does the control unit 95910-R0610 fail?

Stored crash data is the most common cause after an accident, even if no airbag has deployed, and a diagnostic tool does not erase it. Airbag24 erases this crash data during repair. Other causes are aged components, cold solder joints, moisture and corrosion at plugs, and voltage spikes.

That crash data is stored in the memory cannot be seen from outside; it only becomes clear during readout.

The other causes are everyday stresses on the electronics. Solder joints can change over time, moisture attacks the contacts, and voltage spikes arise, for example, with a weak battery or jump-starting.

How can you tell that the 95910-R0610 is defective?

A defect is recognisable by an airbag warning light that lights up permanently or intermittently. In addition there is an error message in the instrument cluster, a missing connection to the diagnostic tool and a fault memory that cannot be cleared.

In such a defect, airbags and seatbelt pretensioners may not deploy in an emergency. You should therefore not ignore the warning.

A cause outside the control unit, for example in the cable or plug, cannot be ruled out with this.

Which vehicles is the 95910-R0610 fitted in?

The control unit 95910-R0610 is fitted in these vehicles: Kia Carnival KA4 (from 2020).

The following vehicles are stored for this number:

• Kia Carnival KA4 (from 2020)

Comparing the part number on the label of the removed unit with this page only ensures that you have the right unit. Have the fault memory read out beforehand, because only this log shows whether the control unit is defective or whether a plug or cable is the cause.

For the same vehicles, we also repair control units with the part numbers 95910-R0100.

How does the repair of the 95910-R0610 work?

First have the fault memory read out and enclose the log. Then disconnect the battery and remove the control unit only afterwards. Processing at Airbag24 usually takes 3–4 working days.

Afterwards create a repair order online and send the unit in well packed. Airbag24 tests it on the test bench, repairs defective components, erases stored crash data and carries out a function test.

Your own unit goes back to you afterwards.

Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-R0610 get to Airbag24?

Shipping is done as a parcel or with a UPS collection that you book for an extra charge. Airbag24 sends the unit back to you by UPS after the repair.

The printed repair order belongs in the parcel, together with shock-resistant packaging for the unit.