Airbag control unit with part number 95910-R2320

What does the airbag control unit 95910-R2320 do?

The airbag control unit 95910-R2320 controls the airbags and seatbelt pretensioners of the SRS restraint system in Kia. It measures the signals from the crash sensors, determines the triggering in an accident and monitors the system continuously. It indicates faults via the airbag warning light.

The system works in the background and requires no operation from you.

If an accident occurs, the unit stores crash data and locks itself.

Why does the control unit 95910-R2320 fail?

Most often, crash data from an earlier accident leads to the problem, even without an airbag having deployed. In addition, ageing electronics, cold solder joints, moisture and corrosion, and voltage spikes can occur.

• ageing components in the electronics
• cold solder joints
• moisture and corrosion at the plug connections
• voltage spikes in the vehicle's electrical system

Crash data cannot be erased with a standard tool. Airbag24 removes it as part of the repair.

How can you tell that the 95910-R2320 is defective?

The airbag warning light in the instrument cluster may stay on permanently or only intermittently, and that is the most important sign. In addition, a fault message may appear in the instrument cluster, or a diagnostic tool may find no connection to the control unit.

This is where the real danger lies: the airbags and seatbelt pretensioners may possibly not deploy in an emergency. A fault memory that cannot be cleared is a further sign that you should have checked.

Which vehicles is the 95910-R2320 fitted in?

The control unit 95910-R2320 is fitted in these vehicles: Kia Sportage NQ5 (from 2021).

The unit is found in the following models:

• Kia Sportage NQ5 (from 2021)

Compare the number on the label of the removed unit with this page. This only establishes that it is the right unit. Have the fault memory read out beforehand, because the log shows whether the control unit itself or a plug or cable is causing the fault.

For the same vehicles, we also repair control units with the part numbers 95910-3U600, 95910-D9000, 95910-R2310, 959100Z200.

How does the repair of the 95910-R2320 work?

Have the fault memory read out and enclose the log. Then disconnect the battery and only after that remove the control unit. Create the repair order online and send in the unit, well packed. At Airbag24, testing, repair and checking usually take 3–4 working days.

Airbag24 examines the unit on the test bench, replaces faulty components, removes the crash data and carries out a function test to finish. Afterwards your unit comes back to you.

Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-R2320 get to Airbag24?

You can send the unit in as a parcel or, for an extra charge, book a UPS collection. After the repair Airbag24 returns it by UPS. The printed repair order goes in the parcel.

Stable, shock-resistant packaging is important so the unit survives the journey unharmed.