Airbag control unit with part number 95910-R2610

What does the airbag control unit 95910-R2610 do?

The airbag control unit 95910-R2610 forms the switching centre of the restraint system (SRS) in Kia. It reads the signals from the crash sensors, selects the suitable airbags and seatbelt pretensioners within milliseconds in an accident, and checks the system continuously.

If a fault occurs, the unit switches on the airbag warning light in the instrument cluster. The sensors supply only measurement data; the verdict is reached in the control unit.

After an accident, the unit records crash data and locks itself. How a failure comes about and how it can be recognised is covered in the following sections.

Why does the control unit 95910-R2610 fail?

Stored crash data is the most common cause for the 95910-R2610, even if no airbag has fired at all. Ageing components, cold solder joints, moisture and corrosion at plug connections, and voltage spikes are also possible.

A normal diagnostic tool cannot erase this crash data, so a reset does not fix anything.

The other causes lie in the electronics themselves and their connections. Components can weaken, solder joints can go cold, and moisture attacks the contacts. Voltage spikes, for example from a weak battery or when starting with a jump start, add further strain on the unit.

How can you tell that the 95910-R2610 is defective?

The airbag warning light in the instrument cluster lights up on the 95910-R2610 either permanently or intermittently. This is accompanied by an error message in the instrument cluster, no connection to the diagnostic tool and a fault memory that cannot be cleared.

The warning light reports a fault that the system has detected itself. While it is lit, airbags and seatbelt pretensioners may possibly not deploy in an emergency.

If the diagnostic tool has no connection, the cause need not lie in the control unit. Wiring or plugs can also be the reason, which is why only reading out the fault memory clarifies the situation.

Which vehicles is the 95910-R2610 fitted in?

The control unit 95910-R2610 is fitted in these vehicles: Kia Sportage NQ5 (from 2021).

Here follows an overview of the vehicles recorded for this part number.

• Kia Sportage NQ5 (from 2021)

Compare the number on the label of the removed unit with this page. This only shows whether it is the right unit. Also have the fault memory read out before you change anything in the system. Only this result shows whether the control unit itself is faulty or whether a plug or cable is the cause.

For the same vehicles, we also repair control units with the part numbers 95910-3U600, 95910-D9000, 95910-R2310, 959100Z200.

How does the repair of the 95910-R2610 work?

You first read out the fault memory of the 95910-R2610 and enclose the log, then disconnect the battery. Only afterwards remove the control unit, create a repair order online and send it in packed.

This order is binding, as it protects you when working on the airbag system.

At Airbag24, the unit is checked on the test bench, defective components are repaired where necessary, the crash data is erased and a function test is run. Processing usually takes 3–4 working days. Your own unit is then returned.

Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-R2610 get to Airbag24?

You send the control unit 95910-R2610 to Airbag24 as a parcel, or you book a UPS collection for an extra charge. After the repair, the unit is returned to you by UPS.

Enclose the printed repair order and pack the unit shock-resistant.