Airbag control unit with part number 95910-R2920

What does the airbag control unit 95910-R2920 do?

In the vehicle from Kia, the airbag control unit 95910-R2920 is responsible for the SRS restraint system. It captures the signals from the crash sensors, determines in a crash within milliseconds which airbags and seatbelt pretensioners are triggered, and monitors the system continuously. It shows faults via the airbag warning light.

After an accident, the unit stores crash data and locks itself. Only the repair lifts the lock.

During normal driving, monitoring works unobtrusively in the background.

Why does the control unit 95910-R2920 fail?

The most common cause is crash data stored after an accident, even if no airbag has deployed. Other causes are aged electronic components, cold solder joints, moisture and corrosion at plug connections, and voltage spikes.

Crash data cannot be erased with a standard diagnostic tool. Airbag24 erases it as part of the repair.

Aged electronic components and cold solder joints impair the function even without a prior accident. Moisture and corrosion at plug connections disturb the transmission of signals, and voltage spikes, for example from a weak battery or a jump start, stress the circuit.

How can you tell that the 95910-R2920 is defective?

The airbag warning light in the instrument cluster stays on or comes on intermittently, an error message appears in the instrument cluster, the diagnostic tool finds no connection to the control unit, and the fault memory cannot be cleared. In an emergency, the airbags and seatbelt pretensioners may then fail to deploy.

The airbag warning light shows the defect directly. Pay attention to changes in the instrument cluster and have them checked promptly.

Which vehicles is the 95910-R2920 fitted in?

The control unit 95910-R2920 is fitted in this vehicle: Kia Sportage NQ5 (from 2021).

The vehicle for this part number appears in the following line:

• Kia Sportage NQ5 (from 2021)

Compare the part number on the label of the removed unit with this page. This only confirms the right unit. Have the fault memory read out beforehand, because only this result shows whether the control unit is defective or whether a plug or cable is the cause.

For the same vehicles, we also repair control units with the part numbers 95910-3U600, 95910-D9000, 95910-R2310, 959100Z200.

How does the repair of the 95910-R2920 work?

First have the fault memory read out and attach the log. Then disconnect the battery and only then remove the control unit. Next, create a repair order online and send the unit in well packed. Processing usually takes 3–4 working days.

Airbag24 tests the unit on the test bench, replaces defective components, erases stored crash data and carries out a function test. Afterwards your own unit is sent back to you. Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-R2920 get to Airbag24?

You send the unit as a parcel or book a UPS collection for an extra charge. After the repair, Airbag24 returns your unit to you by UPS.

Put the printed repair order into the parcel and pack the unit shockproof.