Airbag control unit with part number 95910-S6000

What does the airbag control unit 95910-S6000 do?

In the Hyundai vehicle, the airbag control unit 95910-S6000 forms the control centre of the restraint system (SRS). It reads the crash sensors, decides in an emergency on the triggering of airbags and seatbelt pretensioners, and checks the system without interruption. Detected faults are shown via the airbag warning light.

After a crash the unit stores crash data and locks itself. The decision to trigger is made within milliseconds, while the recording follows afterwards.

Why does the control unit 95910-S6000 fail?

The most common cause on the 95910-S6000 is crash data stored after an accident, even if no airbag was deployed. A standard diagnostic tool cannot erase it. Ageing components, cold solder joints, moisture and corrosion, and voltage spikes are also suspected.

Further causes in detail:

• ageing electronic components
• cold solder joints
• moisture and corrosion at plug connections
• voltage spikes, for example from a weak battery or jump-starting

How can you tell that the 95910-S6000 is defective?

A defect on the 95910-S6000 shows itself through the airbag warning light in the instrument cluster when it lights up permanently or intermittently. In addition there may be an error message in the instrument cluster, no connection to the diagnostic tool, and a fault memory that cannot be cleared.

The airbag warning light remains the clearest indication. Once it is on, the control unit has detected a deviation, and the restraint system may be limited.

A diagnostic tool that cannot establish a connection to the control unit also counts among the warning signs.

Which vehicles is the 95910-S6000 fitted in?

First check whether your vehicle appears in the overview. The control unit 95910-S6000 is fitted in these vehicles: Hyundai Santa Fe TM Facelift (2020-2024).

Here is the overview of the vehicles:

• Hyundai Santa Fe TM Facelift (2020-2024)

First, compare the part number on the label of the removed unit with this page; this only confirms that it is the right unit. Second, have the fault memory read out beforehand, because only this finding shows whether the control unit is defective or a plug or cable is the cause.

For the same vehicles, we also repair control units with the part numbers 95910-2B600, 95910-2B610, 95910-2B620, 95910-2B650, 95910-2B970.

How does the repair of the 95910-S6000 work?

Have the fault memory read out on the 95910-S6000 first and attach the log. Then disconnect the battery and only afterwards remove the control unit. Online, you create a repair order and send in the unit well packed.

This procedure is the safety sequence you must follow.

At Airbag24 the unit is checked on the test bench. Detected defective components are repaired or replaced, the stored crash data is erased and a function test is carried out. Processing usually takes 3–4 working days. The unit then goes back to you.

Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-S6000 get to Airbag24?

The control unit 95910-S6000 reaches Airbag24 as a parcel, alternatively you book a UPS collection for an extra charge. Return after the repair is made by UPS.

Enclose the printed repair order and protect the unit with shock-proof packaging.