Airbag control unit with part number 95910-S6500

What does the airbag control unit 95910-S6500 do?

The airbag control unit 95910-S6500 is the central control unit of the restraint system for the Hyundai. It processes the signals from the crash sensors, selects in an accident which airbags and seatbelt pretensioners are to be triggered, and monitors the system without interruption.

The unit acknowledges faults with the airbag warning light in the instrument cluster. This light is therefore the direct feedback from the control unit to the driver.

An accident leaves its mark: the unit stores crash data and locks itself. Only a repair lifts this lock again.

Why does the control unit 95910-S6500 fail?

Most often the cause is stored crash data that remains in the control unit after an accident, even without a triggered airbag. A normal diagnostic tool cannot remove it. Further influences from the electronics and the connections also come into play.

Airbag24 erases the crash data during the repair. Besides this, the following causes come into consideration:

• aged electronic components
• cold solder joints
• moisture and corrosion at plug connectors
• voltage spikes, for example from a weak battery or a jump start

How can you tell that the 95910-S6500 is defective?

A defect becomes visible when the airbag warning light in the instrument cluster lights up, an error message appears, the diagnostic tool cannot reach the control unit, or the fault memory cannot be cleared. Such findings must be taken seriously.

• airbag warning light stays on continuously or intermittently
• fault message in the instrument cluster
• no connection to the diagnostic tool
• fault memory cannot be cleared

A restraint system with a defective control unit may possibly not trigger in an emergency. Do not wait, therefore, but have the cause clarified.

Which vehicles is the 95910-S6500 fitted in?

The 95910-S6500 is fitted in these vehicles: Hyundai Santa Fe TM Facelift (2020-2024).

The following overview shows the vehicles stored for this part number.

• Hyundai Santa Fe TM Facelift (2020-2024)

Comparing the part number on the device with this page merely confirms that it is the right unit. Also have the fault memory read out, because only the log shows whether the control unit is defective or whether a plug or a cable is the cause.

For the same vehicles, we also repair control units with the part numbers 95910-2B600, 95910-2B610, 95910-2B620, 95910-2B650, 95910-2B970.

How does the repair of the 95910-S6500 work?

First have the fault memory read out and enclose the log. Then disconnect the battery and only then remove the control unit 95910-S6500. Next, create a repair order online and send in the well-packed unit.

Airbag24 examines the unit on the test bench, replaces defective components, erases the crash data and carries out a function test. Processing at Airbag24 is planned for 3–4 working days.

Afterwards your own unit is returned to you. Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-S6500 get to Airbag24?

You send the control unit as a parcel or book a UPS collection for an extra charge. Airbag24 returns it to you by UPS after the repair.

Put the printed repair order into the parcel and pack the unit shockproof against vibration.