Airbag control unit with part number 95910-S8000

What does the airbag control unit 95910-S8000 do?

The airbag control unit 95910-S8000 controls the SRS restraint system in Hyundai. In an accident it evaluates the crash sensors and decides within milliseconds which airbags and seatbelt pretensioners to deploy. After an accident it stores crash data and locks itself.

The unit monitors the system constantly to detect faults. If it finds one, it reports it via the airbag warning light in the instrument cluster.

This keeps the state of the restraint system visible to the driver.

Why does the control unit 95910-S8000 fail?

Stored crash data after an accident is the most common cause, even if no airbag has deployed. A normal diagnostic tool cannot remove it. Aged components, cold solder joints, moisture and corrosion, and voltage spikes are also possible causes.

The search for the cause starts with the crash data, because it stays in the memory even if the airbags did not open. Reading it out shows the data but does not remove it.

Other triggers are technical in nature. Electronics age, solder joints go cold, moisture and corrosion disturb plug connections, and voltage spikes attack the vehicle electrical system. At Airbag24 the team erases the crash data during the repair.

How can you tell that the 95910-S8000 is defective?

A fault shows when the airbag warning light in the instrument cluster stays on permanently or intermittently. An error message in the instrument cluster, a missing connection to the diagnostic tool or a fault memory that cannot be cleared also indicate it. In an emergency, airbags and seatbelt pretensioners may fail to deploy.

If you see these symptoms, have the system checked, even if the vehicle seems unremarkable in daily use.

The warning light is intended precisely to show a fault, so take it seriously.

Which vehicles is the 95910-S8000 fitted in?

The 95910-S8000 is fitted in these vehicles: Hyundai Palisade LX2 Facelift (2022-2025) and LX2 (2018-2022). The part number is the basis of this assignment.

Here is the list in detail:

• Hyundai Palisade LX2 Facelift (2022-2025)
• Hyundai Palisade LX2 (2018-2022)

Before sending it in, these steps are worthwhile. Comparing the part number on the label with this page only tells you that you have the right unit in front of you. Having the fault memory read out first, however, shows whether the control unit is defective or whether the fault lies in a plug or cable.

For the same vehicles, we also repair control units with the part numbers 95910-S8520, 95910-S8530.

How does the repair of the 95910-S8000 work?

Reading out the fault memory comes first; the log goes into the parcel afterwards. Then disconnect the battery and only then remove the control unit. At Airbag24, inspection, repair and testing usually take 3–4 working days.

You create the repair order online; then you send in the packed unit.

Airbag24 replaces defective components, erases stored crash data and carries out a function test. Afterwards you receive the unit back.

Our repairs come with 2 years' statutory liability for defects.

The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-S8000 get to Airbag24?

Either you send the unit as a parcel, or you book a UPS collection for an extra charge. After the repair Airbag24 returns it to you by UPS.

The printed repair order goes into the parcel. Pack the unit shockproof so that it arrives safely.