Airbag control unit with part number 95910-S8600

What does the airbag control unit 95910-S8600 do?

The airbag control unit 95910-S8600 controls the restraint system (SRS) of Hyundai. It reads the signals from the crash sensors, determines within a few milliseconds in a collision which airbags and seatbelt pretensioners fire, and reports faults via the airbag warning light.

The control unit monitors the system throughout the journey, checking sensors, wiring and actuators. If it detects a deviation, it creates an entry in the fault memory.

An accident causes the control unit to store crash data and lock itself.

Why does the control unit 95910-S8600 fail?

The most common reason on the 95910-S8600 is crash data stored after an accident, even if no airbag has deployed. This data cannot be erased with a normal diagnostic tool, but Airbag24 erases it during the repair. Ageing, moisture and voltage spikes also play a part.

An impact without deployment therefore still leaves traces in the control unit's memory.

• aged electronic components
• cold solder joints
• moisture and corrosion at plug connectors
• voltage spikes, for example from a weak battery or a jump start

Which cause applies in an individual case is only clarified by the examination on the test bench.

How can you tell that the 95910-S8600 is defective?

If the airbag warning light in the instrument cluster lights up permanently or intermittently on the 95910-S8600, that is a clear sign. Added to this are a fault message in the instrument cluster, a diagnostic tool without connection to the control unit, and a fault memory that cannot be cleared.

In an emergency, airbags and seatbelt pretensioners may not deploy with such a fault. So do not postpone acting on the warning.

The light signals the fault as soon as the control unit has detected it. Reading out the fault memory then lists the stored entries.

Which vehicles is the 95910-S8600 fitted in?

The control unit 95910-S8600 is found in these vehicles: Hyundai Palisade LX2 Facelift (2022-2025) and LX2 (2018-2022). What matters is whether the number on the removed unit matches this page.

These vehicles are recorded for this part number:

• Hyundai Palisade LX2 Facelift (2022-2025)
• Hyundai Palisade LX2 (2018-2022)

Place the label of the removed unit next to this page, and you will see whether the numbers match. Also have the fault memory read out before removal, because only this result shows whether the control unit itself is defective or whether a plug or cable is causing the problem.

For the same vehicles, we also repair control units with the part numbers 95910-S8520, 95910-S8530.

How does the repair of the 95910-S8600 work?

Before removal, have the fault memory read out and enclose the log. Only then disconnect the battery and remove the control unit. At Airbag24 the unit goes onto the test bench, after which defective components are repaired and stored crash data erased before a function test follows. Processing at Airbag24 usually takes 3–4 working days.

Then create the repair order online and pack the unit well. Then send it off.

After the repair you receive your own unit back.

Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-S8600 get to Airbag24?

The control unit 95910-S8600 reaches Airbag24 by parcel or with a UPS collection booked for an extra charge. The return is also by UPS. Enclose the printed repair order and pack the unit shock-proof.

A sturdy box with enough filling material protects the control unit in transit. Make sure the parcel is completely sealed.