Airbag control unit with part number 95910-S9000

What is the function of the airbag control unit 95910-S9000?

The airbag control unit with part number 95910-S9000 is the central control module of the Supplemental Restraint System (SRS) for the Kia Telluride ON from model year 2019 onward. It processes data from crash sensors and, in the event of an accident, controls the deployment of airbags and seatbelt pretensioners to protect occupants.

As an OEM-specific module, the 95910-S9000 is precisely tailored to the vehicle architecture of the Kia Telluride ON. Its primary task is the continuous monitoring of all safety‑related components of the restraint system, including front, side, and head airbags, seatbelt pretensioners, and their associated sensors.

In addition to its deployment function, the control unit also performs diagnostics on the entire system. It detects faulty components or communication issues and signals these by illuminating the airbag warning light on the instrument cluster.

Why does the airbag control unit 95910-S9000 fail?

The most common cause of failure for the 95910-S9000 control unit is the storage of crash data following an accident or impact. Other defects include internal electronic faults that result in a permanently illuminated airbag warning light or complete loss of communication with diagnostic tools.

A key reason for repair is the device being locked due to stored crash data. Even minor accidents—such as slight rear-end damage where no airbags deployed—can trigger an internal lockout. This lock prevents re‑deployment and must be professionally reset.

Furthermore, hardware defects may occur on the circuit board, often caused by external factors like moisture or pre‑existing damage from improper repair attempts. Symptoms range from internal error codes and the failure of specific functions (e.g., a malfunctioning clock) to complete system failure when heated.

How can you recognize a defect in the 95910-S9000?

A defect in the 95910-S9000 control unit primarily manifests as a persistently illuminated airbag warning light (SRS lamp) on the dashboard. Additionally, the unit may become inaccessible to diagnostic tools, making fault analysis at the workshop impossible. Stored crash data is a frequent yet invisible cause.

The most obvious sign is the airbag warning light that fails to extinguish after starting the engine. This indicates an active fault in the restraint system, compromising occupant safety since airbags might not deploy in a real emergency.

Another clear symptom is the lack of communication: when a workshop attempts to read the fault memory using an OBD diagnostic tool, no response is received from the control unit. This points to a serious internal malfunction.

In some cases, specific error codes are logged in the fault memory, indicating an internal defect within the control unit itself. Errors such as “internal fault” or “side sensor error” can directly signal a malfunction of the 95910-S9000 module.

In which models is the 95910-S9000 installed?

The airbag control unit with original part number 95910-S9000 is model‑specific and exclusively fitted to the Kia Telluride SUV of the ON series. At Airbag24, we repair this control unit for all model years of this vehicle line.

Accurate matching ensures that all safety‑critical functions are properly activated. At Airbag24, the 95910-S9000 control unit is serviced for the following model:

Kia Telluride ON (from model year 2019 onward)

While other Kia models have separate part numbers such as 95910-1Y100, the 95910-S9000 remains the only verified part number for repairs on the Telluride ON.

How is the 95910-S9000 professionally repaired?

Repair of the 95910-S9000 control unit focuses on electronic restoration. The primary service at Airbag24 involves erasing crash data and resetting the module to factory settings. For hardware defects, faulty components on the circuit board are carefully replaced. All repairs include a final test and a 12‑month warranty.

After submitting the removed control unit to Airbag24, a comprehensive diagnosis is first performed to verify communication capability and identify any internal faults. The most common repair step is removing stored accident data, thereby deactivating the airbag warning light and restoring full system functionality.

This process utilizes specialized programming tools such as the DiagProg4, which provide direct access to the control unit’s memory. If a deeper electronic fault is detected, the affected components on the circuit board are identified and replaced with new, high‑quality parts.

Subsequently, the device’s functionality is tested to ensure it communicates flawlessly with the vehicle again and correctly controls all safety features. After a successful repair, the control unit can be easily reinstalled in the vehicle (plug-and-play).

What are the benefits of a repair?

Repairing the airbag control unit 95910-S9000 is a significantly more cost-effective alternative to purchasing a new part or a used replacement module. It restores full functionality without requiring time-consuming reprogramming on the vehicle. Additionally, you receive a 12-month warranty on the work performed.

A key advantage is the substantial cost savings. Repair is often up to 70% cheaper than buying a new control unit from the manufacturer. This ensures your vehicle is economically restored without compromising safety.

Another benefit is preserving the original component. Since the vehicle-specific control unit is repaired, all coding and configurations remain intact. After repair, the unit can be easily reinstalled and functions immediately. In contrast, used replacement modules often come with uncertainty regarding vehicle history and compatibility.

What shipping options are available?

To send your control unit to Airbag24, you can either drop it off yourself at no charge or arrange a convenient UPS pickup at your preferred location. Returns are free via UPS Standard, or optionally via Express and/or cash-on-delivery. Self-collection is also possible.

For the outbound shipment, two free options are available: you can ship the package to us yourself, or use UPS’s pickup service, which collects the control unit directly from your home or workshop.

After repair, we return the unit to you using the following options:

UPS Standard shipping is free for you. For faster delivery, you can choose UPS Express shipping. Both options are also available with cash-on-delivery. Alternatively, you can pick up the repaired control unit in person from our facility.