Airbag control unit with part number 959101P000

What is the function of Airbag Control Unit 959101P000?

The airbag control unit with part number 959101P000 is the central control module for the occupant protection system in the Kia Venga YN (model years 2009–2019). It processes signals from up to three crash sensors, evaluates them in real time, and ensures that, in the event of a collision, the airbags and seatbelt pretensioners are deployed precisely.

As the “brain” of the passive safety system, this module coordinates all relevant components. These include not only the front and side airbags but also the curtain airbags, seatbelt pretensioners, and the airbag ring on the steering wheel. It guarantees that, in an emergency, all restraint systems operate correctly and in perfect timing to provide optimal protection for occupants.

The part number is also listed as 95910-1P000 or 95910 1P000 and is often accompanied by additional designations such as VER 1.1, 621392200, or 611188200, all referring to the same technical unit.

What types of failures occur with 959101P000?

Failures of the 959101P000 control unit typically arise from three main causes: stored crash data following a collision that locks the unit, general electronic malfunctions due to component aging, and physical damage such as water ingress. These issues often result in the airbag warning light remaining illuminated continuously and the B1620 fault code being logged (indicating an internal error).

The most common cause of failure is the storage of crash data. After a collision—even minor ones—the control unit self‑locks for safety reasons. This lock cannot be cleared using standard diagnostic tools and requires specialized electronic repair.

Electronic malfunctions represent another widespread source of problems. Defective internal components, faulty solder joints, or issues with the memory chip can trigger the B1620 fault code, signaling an irreparable internal hardware or firmware failure. Similarly, water damage caused by leaks in the vehicle can corrode and destroy sensitive electronics.

How do you recognize a defect in the control unit?

A defective 959101P000 airbag control unit primarily manifests as a permanently or intermittently illuminated airbag warning light on the instrument cluster. Often, the control unit cannot be read by a diagnostic tool (no communication), or fault codes such as B1620 appear that cannot be cleared.

The most noticeable symptom is the persistently lit airbag warning light. It does not extinguish after starting the vehicle, indicating a serious system fault and meaning that the airbags would fail to deploy in the event of a crash.

Another clear sign is when a workshop attempts to read the fault memory but cannot establish communication with the airbag control unit. The module no longer responds to diagnostic requests.

If communication remains possible, the B1620 fault code (internal error) is frequently stored in the memory. This code cannot be erased using standard workshop tools and indicates an irreparable hardware-level defect within the device.

In which vehicles is part number 959101P000 installed?

Part number 959101P000 is specifically used in the Kia Venga YN series, produced from 2009 to 2019. This includes various engine options for the MPV model, such as the 1.4 CVVT gasoline engine or the 1.4 CRDi diesel engine. Airbag24 offers professional repair services for this control unit.

At Airbag24, we repair the 959101P000 control unit for the following vehicle model:

Kia Venga (YN) (model years 2009–2019)

Before submitting a repair request, it is crucial to verify the part number on the label of the removed control unit to ensure exact compatibility.

How does repair work at Airbag24?

At Airbag24, repairing the 959101P000 control unit follows a standardized process. Upon receipt, the unit undergoes electronic analysis to identify the root cause of the failure. Subsequently, stored crash data is erased, defective components such as capacitors are replaced, and the firmware is reprogrammed to restore full functionality.

After receiving the removed control unit, our technicians perform a comprehensive chip‑level analysis to determine whether the fault was caused by stored crash data, an internal hardware issue, or water damage.

In the next step, faults are systematically addressed. Stored crash data is completely and thoroughly deleted from memory. For electronic defects, faulty components like processors, memory chips, or capacitors are professionally replaced. Finally, the unit is tested on a bench to verify the flawless operation of all circuits.

A key advantage of repair is that the control unit is ready for use immediately after installation. No time-consuming reprogramming or vehicle coding is required. We provide a 12-month warranty on every repaired unit.

What shipping options are available at Airbag24?

To send your control unit to Airbag24, you can either ship it yourself free of charge or arrange a convenient UPS pickup at your preferred location. For return shipping, we offer free standard options as well as faster express services, including cash-on-delivery. Self-collection is also possible.

For outbound shipping, you have two choices: you can send the package to us at your own expense, or use the convenient UPS pickup service, which arranges for the package to be collected directly from your location.

After successful repair, we offer several return shipping options:

UPS Standard shipping is free for you. For faster delivery, you can opt for UPS Express shipping. Both shipping methods are also available with cash-on-delivery. Alternatively, you can pick up the repaired control unit in person at our premises.